What are the requirements for installing a gas turbine flowmeter straight pipe? What should I pay attention to？
2021-05-11
Gas turbine flowmeter is a new type of intelligent instrument which integrates turbine flow sensor and display integration by using ultra-low power consumption single chip microcomputer technology. It adopts double row liquid crystal field display, which has obvious advantages such as compact mechanism, intuitive and clear reading, high reliability, no interference from external power supply, anti-lightning strike and low cost. The instrument has three-point correction of the instrument coefficient, intelligent compensation of the instrument coefficient nonlinearity, and can be corrected on the spot. The high definition LCD displays both instantaneous flow (4 significant digits) and cumulative flow (8 significant digits with zero clearing function). Keep all valid data for 10 years after power failure. These turbine flowmeters are explosion-proof products, explosion-proof grade: ExdIIBT6.
So what are the requirements for installing a gas turbine flowmeter straight pipe? What should I pay attention to?
1. There is a certain length of straight pipe
When you specifically understand the requirements for gas turbine flowmeter installation of straight pipe, you can find that the flowmeter needs at least 10DN straight pipe section upstream during the entire installation process, and the downstream also needs to have 5dn straight pipe section. After meeting such conditions, it can be normally installed and used, and it is required to be smooth and clean in the wall.
2. The sealing effect needs to meet the requirements
The gas turbine flowmeter installation straight pipe requirements are that the sensor pipe axis should be concentric with the connected pipe axis, and the sealing effect is very good during the entire connection process, because only after meeting the corresponding requirements can it be used correctly, after all, safety needs to be ensured during the installation process.
3. Find a professional to install the flow meter
In the specific installation process, we hope that you can find professional personnel to install, because there may be a need to install the corresponding rectifier, you also need to understand the requirements of gas turbine flowmeter installation straight pipe, in accordance with the corresponding standards for installation and use.
Gas turbine flowmeter installation of straight pipe requirements is to ensure that the entire installation effect is better, the pipeline in the entire installation process should also be kept clean and tidy, to avoid concave or peeling situation, to ensure that normal measurement data.
Share To：
News
- Why is the thermal gas mass flowmeter not affected by pressure strength and temperature?
- What to do when a thermal gas mass flow meter fails?
- How are thermal gas mass flow meters used? What are the applications?
- Under what circumstances is the gas measurement need to be regulated compensated vortex flowmeter
- Why Is The Aister Thermal Gas Mass Flowmeter So Popular ?
- Gas turbine flowmeter manufacturers explain their main advantages in measurement
- Gas turbine flowmeter manufacturer Aister instrument field experience summary
- Aister Instrument Empowerment Conference
