Aister shares the factors that affect the measurement accuracy of precession vortex flowmeters
2021-06-16
Precession vortex flowmeter is a kind of fluid oscillation flowmeter, which can be applied to the flow measurement of oil, steam, natural gas, water and other media. It has the advantages of compact structure, clear reading, high reliability, no interference from external power supply, lightning resistance, low cost, and is widely used in petroleum, chemical industry, metallurgy, paper and other industries to measure liquid volume instantaneous flowmeter and volume total. In the actual use process, the precession vortex flowmeter is often inaccurate for various reasons:
1.the working environment is relatively harsh, such as electromagnetic field interference, dust, high temperature, vibration, humidity, etc., may cause the turbine flow sensor to misoperate or fail, directly resulting in the turbine flow meter error, the error is positive or negative, may not be obvious, or may be completely ineffective. For the above phenomenon, when the problem is relatively serious, the problem can be found from the comparison of the working status of the process, and it is easy to take corresponding measures. However, in the early stages of the problem, the problem cannot be detected without taking special measures.
2. Changes in fluid temperature and pressure may make the liquid in the pipeline escape the air contained in it, or because the pressure in the pipeline is lower than the saturated vapor pressure of the fluid, some of the liquid becomes steam, or because of the negative pressure of the medium, the outside gas is sucked into the pipeline, and these gases flow with the measured liquid, resulting in an increase in the indicator value of the instrument and a positive error, which is unfavorable to the demand side of the fluid.
3. Fibrous or viscous impurities in the fluid are attached to the rotating part of the flow meter, which increases the rotational resistance, resulting in a decrease in the indicator value of the instrument and a negative error, which is unfavorable to the supplier of the fluid.
4.there are generally some impurities in the medium, the bearing, the shaft to produce wear, so that the gap between the two increases, the dynamic balance of the moving parts is destroyed, the speed decreases, or the dirt enters the gap, the movement resistance increases, the speed decreases. These reasons cause the display value of the instrument to decrease, and there is a negative error, which is unfavorable to the fluid supplier.
Share To：
News
- Why is the thermal gas mass flowmeter not affected by pressure strength and temperature?
- What to do when a thermal gas mass flow meter fails?
- How are thermal gas mass flow meters used? What are the applications?
- Under what circumstances is the gas measurement need to be regulated compensated vortex flowmeter
- Why Is The Aister Thermal Gas Mass Flowmeter So Popular ?
- Gas turbine flowmeter manufacturers explain their main advantages in measurement
- Gas turbine flowmeter manufacturer Aister instrument field experience summary
- Aister Instrument Empowerment Conference
