-
2024-05-09
Characteristics of electromagnetic flowmeter
1. The measurement is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity; -
2024-05-07
Summary of typical wrong installation of radar level meter
Although the installation and debugging of the radar level meter is simple, it will still encounter some wrong installation methods. The following summarizes some common installation methods that we often encounter, to help you in the debugging and installation of the radar, more handy. -
2024-04-26
Radar level meter common problems and treatment methods
Radar level meter has been widely promoted and applied in chemical industry because of its advantages such as small blind area, -
2024-04-24
Radar level meter failure and treatment
Radar level meter often fails in daily use, and its failure is roughly divided into four types: data unchanged, data suddenly maximum, data suddenly zero, data deviation from the actual value is too large or too small and remains unchanged. -
2024-04-22
Aister Instrument participated in the 25th China World Expo 2024
Aister Instrument participated in the 25th China World Expo 2024 -
2024-04-17
On-site installation requirements and instructions for thermal gas mass flow meters
The thermal gas mass flow meter is one of the instruments widely used in the field of industrial automation, whose accurate measurement performance and stable work require correct field installation. -
2024-04-16
The fault and solution of liquid turbine flowmeter
Liquid turbine flow meter is a kind of high reliability instrument for measuring liquid flow, which can solve the non-conductive liquid medium that can not be measured by electromagnetic flowmeter. -
2024-04-11
Electromagnetic Flow Meter common faults and troubleshooting
Electromagnetic flowmeter as an industrial electronic sensor equipment, in the process of use, it is inevitable that there will be some equipment failure problems, then when the electromagnetic flowmeter failure, we are under normal circumstances to analyze which part of the problem, and then for the problem to find a solution to the problem.