Gas turbine flowmeter manufacturer Aister instrument field experience summary

    Aister Instrument (Shanghai) Co. Ltd. has a high-quality, high-level technical development team and management team, committed to providing customers with safe, easy to use, high precision automation industrial instruments, products have won the appreciation and trust at home and abroad, combined with more than 10 years of flowmeter industry experience and feedback from many customers, the use and maintenance of gas turbine flowmeter is summarized as follows:

    Gas turbine flowmeter manufacturer Aister instrument reminds you that in order to ensure the long-term normal work of the gas turbine flowmeter, it is necessary to regularly check the operating status of the flowmeter, and also do a good job of maintenance, and timely troubleshooting when problems are found.

    1.Before the turbine flowmeter is put into operation, the instrument coefficient should be set first, and the meter should be carefully checked to ensure that the flowmeter is correctly connected and well grounded before it can be powered on.

    2.Clean, check and recalibrate the flow meter regularly. Flow meters with lubricating oil or cleaning fluid injection ports should be regularly injected with lubricating oil or cleaning fluid according to the requirements of the instructions to maintain the good operation of the impeller.

    3.Monitor the condition of the display instrument, evaluate the reading of the display instrument, and check the abnormality in time.

    4.Keep the filter unblocked. The filter is blocked by impurities, which can be judged from the increase of the difference in the reading of the pressure gauge at the entrance and exit, and the blockage is eliminated in time, otherwise, the flow rate will be seriously reduced.

    The above is the introduction of the gas turbine flowmeter by Aister instrument. Thanks to the user's choice, Aister instrument will continue to work hard to provide users with accurate measurement.