What is a split vortex flowmeter? What are its characteristics?

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

1. After power-on, there is fluid flow in the pipeline, but the vortex flowmeter has no signal output

At present, there are many misunderstandings about steam measurement in China, and many users often think that buying a high-price flowmeter can get accurate measurement results. The measurement of steam is different from other fluids such as water, air and other media, and there are many factors affecting its measurement in the actual measurement. Therefore, there is often a phenomenon that the flow meter itself is qualified, but the actual measurement is not “allowed”. So what’s the problem with these factors?

Vortex flowmeter is a new flowmeter successfully developed on the basis of Karman vortex principle. Vortex flowmeter is suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquid. How to ensure the accuracy of vortex flowmeter measurement during installation?

Temperature and pressure compensation integrated vortex flowmeter performance advantages:

Vortex flowmeter is a velocity flowmeter, which measures the volume flow rate in the working state.

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

Vortex flowmeter is mainly used to set up a vortex generating body (resistance fluid) in the fluid, from both sides of the vortex generating body alternately to produce regular vortices, to measure the flow of fluid, vortex flowmeter is mainly used for industrial pipeline fluid flow measurement, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, the output signal may be unstable, causing this phenomenon to be excluded from the following points:

Vortex flowmeter is based on the Karman vortex street principle, which is mainly performed by setting a non-streamlined vortex generator (resistance fluid) in the flowing fluid, and alternately producing two columns of regular vortices from both sides of the vortex generator.

The working principle of vortex flowmeter is to place a non-streamlined vortex generator in the fluid, so that the fluid is alternately separated on both sides of the generator, releasing two series of regularly staggered vortex flowmeter. In a certain range, the vortex separation frequency is proportional to the flow rate, and the vortex flowmeter can measure the flow rate of the medium by calculating the vortex separation frequency.

Vortex flowmeter is a new type flowmeter for measuring fluid flow in closed pipeline according to Karman vortex principle. It is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. In addition to the characteristics of the aforementioned vortex flowmeter, it also has the following characteristics:

The vortex flowmeter has a flow meter in the pipeline without output. The reasons for this failure and the corresponding solutions are as follows:

One of the notable advantages of vortex flow meters is their versatility, as they can be employed in a wide range of applications across different industries. They are particularly useful for measuring the flow of fluids with varying viscosities, making them suitable for applications in petrochemical, pharmaceutical, and water treatment industries. Additionally, vortex flow meters are known for their ability to handle both high and low-flow conditions with consistent accuracy, providing reliable measurements across a broad operational range.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Vortex flowmeter is a commonly used flow meter, the use of any instrument is inseparable from daily maintenance and maintenance, whether it is its own failure or interference by external factors, we calmly respond to the occurrence of failure.

In the realm of water and wastewater treatment, vortex flow meters are indispensable tools for monitoring and controlling the flow of water through pipelines. Municipalities and industrial facilities rely on these meters to measure the volume of water being processed and distributed, facilitating efficient water management. Additionally, vortex flow meters are often employed in chemical processing plants to measure the flow rates of various chemicals and ensure precise dosing in manufacturing processes. Their robust design and resistance to corrosive substances make them well-suited for these demanding environments, contributing to the overall reliability and accuracy of industrial processes.

In the selection process of the vortex flow meter, in addition to the selection of a high-precision type in a comprehensive consideration of the demand, other accessories of the vortex flow meter are also very important, such as the selection of flow transmitters and the selection of compensatory pressure transmitters.

Vortex flowmeter has high requirements for installation and working environment, and the front and rear straight pipe sections must be installed in accordance with the specifications.

The working principle of vortex flowmeter is to place a non-streamlined vortex generator in the fluid, so that the fluid is alternately separated on both sides of the generator, releasing two series of regularly staggered vortex flowmeter. In a certain range, the vortex separation frequency is proportional to the flow rate, and the flow rate of the medium can be measured by calculating the vortex separation frequency.

Vortex flowmeter is a kind of fluid oscillating flow detection instrument based on Karman vortex principle. It is characterized by small pressure loss, wide range and high measurement accuracy. It is almost unaffected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, there may be problems such as large measurement errors, so we need to eliminate problems from the following aspects:

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flowmeters:

Vortex flowmeter is a velocity flowmeter, which measures the volume flow rate in the working state. If you choose the table according to the volume flow rate, the mass flow rate provided by the customer should be converted into the volume flow rate under the working state, and then determine the diameter of the selected instrument against the volume flow parameter.

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.

Technical requirements and precautions for measuring natural gas with precession vortex flow meter

Vortex flowmeter is one of the commonly used instruments in daily production, therefore, failure will occur from time to time, the main reasons for the inaccurate flow accuracy of the vortex include: the influence of temperature on the measurement, the influence of the accumulation of the vortex generating body on the flow surface, the influence caused by the inconsistency between the distribution tube and the inner flow meter.

The water and wastewater treatment sector also benefits significantly from vortex flow meters. These meters are used to measure the flow of water in pipes, helping to monitor consumption, detect leaks, and optimize water treatment processes. Their robust construction and suitability for both clean and dirty water make vortex flow meters essential tools for managing water resources effectively.

Vortex flowmeter is a kind of instrument device to measure the flow of pipeline fluid, and it works by the principle of velocity vortex. Vortex flowmeter has two kinds of volume and mass flow measurement, which can be selected according to the situation of the field.

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems:

Vortex flowmeter is also known as Karman vortex flowmeter. It is a separation flowmeter made of the principle of natural oscillation of fluid. When a fluid flows at a sufficiently large velocity through an object perpendicular to the direction of the fluid, if the object is of appropriate size, it will produce a neatly aligned and reversed vortex train behind the object along two parallel lines.

Vortex flow meters are highly versatile instruments widely utilized in various industrial applications to measure the flow of liquids, gases, and steam. One prominent application of vortex flow meters is in the oil and gas industry, where they play a crucial role in measuring the flow rates of hydrocarbons through pipelines. These meters are particularly adept at handling the challenging conditions present in oil and gas operations, including high pressures and temperatures. By accurately measuring flow rates, vortex flow meters contribute to efficient process control and optimization, ensuring that production and transportation systems operate smoothly and cost-effectively.