What fields can thermal gas mass flowmeters be used in

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

Thermal gas mass flow meter is used to measure and control the gas mass flow meter, different from other gas flow meters, do not need to carry out pressure and temperature correction, directly measure the gas mass flow.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The medium of one of the two tubes of the thermal gas mass flowmeter does not flow, and the medium of the other tube flows. By comparing the Coriolis force of two pipes to obtain the flow rate, it is convenient to eliminate the natural vibration of the pipeline, the vibration of the fluid itself and other factors that affect or interfere with the measurement.

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

In practical applications, thermal mass flowmeters require careful attention to various factors to ensure accurate and reliable measurement of fluid flow rates. Here are some key considerations for the practical application of thermal mass flowmeters:

Thermal gas mass flowmeter has a wide range of applications in many fields, its high precision, rapid response and stability characteristics make it in a variety of gas flow measurement occasions can play an excellent performance, for the development of various industries to provide more reliable technical support.

The thermal gas mass flowmeter is designed based on the principle of thermal diffusion. The meter uses constant temperature difference method to measure the gas accurately. The thermal gas mass flowmeter has the advantages of small volume, high digitization, easy installation and accurate measurement.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument adopts constant temperature difference method for gas mass flow sensor part consists of two reference platinum resistance temperature sensors. Using a bridge loop, one sensor measures the flow temperature and the other maintains a constant temperature difference above the fluid temperature, allowing flow measurement under high temperature and high pressure conditions.

The correct use of gas flowmeters is the key to ensure accurate and reliable measurement results. The following is the correct use of gas flowmeters:

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

Installing and debugging a thermal mass flowmeter correctly in the early stages is crucial to ensure accurate and reliable measurements. Here are some precautions to take during installation and debugging:

The thermal gas mass flowmeter uses the principle of thermal diffusion, and its working principle determines the change of the measured medium gas with the temperature and pressure, which affects the data change of the measured results.

Thermal gas mass flowmeters are a type of mass flowmeter specifically designed for measuring the flow rate of gases, while mass flowmeters, in a broader sense, can measure the flow rate of both gases and liquids. Here are some key differences between thermal gas mass flowmeters and other types of mass flowmeters:

The thermal mass flowmeter is an device for measuring gas flow by using the principle of thermal diffusion. The sensor consists of two reference thermal resistors (RTDS). One is the speed sensor RH, and the other is the temperature sensor RMG, which measures the temperature change of the gas. When the two RTDS are placed in the measured gas, one sensor RH is heated and the other sensor RMG is used to sense the measured gas temperature. As the gas flow rate increases, the airflow carries away more heat, and the temperature of the sensor RH drops.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

The thermal gas flowmeter adopts the principle of thermal diffusion, and the thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions. Typical sensing elements of thermal gas mass flowmeters include two thermal resistors (PT100), one is a speed sensor and one is a temperature sensor that automatically compensates for changes in gas temperature.

The reason why the thermal gas mass flowmeter is so popular is mainly due to its many advantages and wide application scenarios. Here’s a breakdown of why it’s popular:

Check Power Supply: Ensure that the flowmeter is receiving power from the power supply source. Verify that the power supply is operational, and check the connections between the flowmeter and the power source. If necessary, measure the voltage at the flowmeter terminals to confirm proper power supply.

Direct measurement of gas mass, without temperature, pressure compensation of gas flow measurement instrument, it represents the development trend of gas flow measurement. The thermal mass flowmeter sensor part is composed of two reference platinum resistance temperature sensors, using a bridge loop, one sensor measures the fluid temperature, and the other sensor is a heating element, maintaining a constant temperature difference higher than the fluid temperature, that is, when the gas flows through the heating element, the heat is taken away, and the heat is proportional to the flow rate of the gas and the density of the gas. To maintain a fixed temperature difference between the two temperature sensors requires the circuit to provide more power to the heating element, and the amount of output power in the circuit is related to the mass of the fluid, thus measuring the flow rate.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

Thermal Gas Mass Flow Meter is also divided into flange link Thermal Gas Mass Flow Meter and plug-in link Thermal Gas Mass Flow Meter, The following describes the application scope of the Thermal Gas Mass Flow Meter.

The thermal gas flowmeter has many remarkable characteristics, which make it widely used in the field of gas flow measurement. The following are the main features of thermal gas flowmeters:

Thermal gas mass flowmeter has certain operating procedures and precautions in use, and must pay attention to these points when in use:

Common faults encountered with thermal mass flowmeters can disrupt their accurate measurement capabilities. Here are some typical issues along with potential solutions:

The application of thermal gas mass flow meter in various industries

Thermal mass flowmeters are widely used in various industries due to their ability to measure the flow rate of gases accurately. Here are some applications of thermal mass flowmeters across different industries:

Thermal mass flowmeters are known for their ability to provide accurate and reliable measurements of fluid flow rates, regardless of changes in pressure and temperature. This resilience to pressure and temperature variations is due to the operating principle of thermal mass flowmeters and their design features. Here’s why thermal mass flowmeters are not significantly affected by changes in pressure and temperature:

Thermal gas mass flowmeter can be used to measure any gas that does not contain condensed liquid in various shapes and materials (such as round pipe, square pipe, rectangular pipe, etc., diameter from 8mm-10000mm or larger, all kinds of metal, plastic, cement material), it does not need temperature and pressure compensation, directly measure the mass flow of fluid.

One of the key advantages of thermal mass flow meters is their quick response time, enabling real-time monitoring and control of gas flow in dynamic processes. Moreover, these meters are known for their low pressure drop, minimizing energy consumption and preserving the efficiency of the overall system. With no moving parts, thermal mass flow meters also offer low maintenance requirements, reducing downtime and operational costs for industries relying on precise gas flow measurements.

Response speed: 1s
Output signal: 4-20mA (Photoelectric isolation, large load 500Ω)、
pulse、RS-485 (photoelectric isolation)、HART agreement
Alarm: 1-2 relay normally open contact、10A/220V/AC、*/30V/DC
Type of supply: Separate structure, integrated structure
Pipe material: Carbon steel, stainless steel, plastic, etc
Field display: Four lines of Chinese liquid crystal display
Display content: Mass flow, standard volume flow, cumulative flow, standard time, cumulative running time, standard flow rate, etc
Protection grade: IP65
Sensor material: Stainless steel Stainless steel, carbon steel

The origin of the thermal gas mass flowmeter is from the hot wire anemometer. The temperature of the platinum heating wire has a proportional relationship with the change in the flow rate of the fluid: the faster the flow rate, the more heat is taken away.