What are the requirements for the use of thermal gas mass flowmeters

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

The thermal mass flowmeter is a flow meter based on the principle of thermal diffusion. The device uses the constant temperature difference method to measure the gas accurately. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

Thermal gas mass flowmeter can be used to measure any gas that does not contain condensed liquid in various shapes and materials (such as round pipe, square pipe, rectangular pipe, etc., diameter from 8mm-10000mm or larger, all kinds of metal, plastic, cement material), it does not need temperature and pressure compensation, directly measure the mass flow of fluid.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Due to the continuous development of thermal gas mass flow meter is based on the principle of thermal diffusion, that is, the use of fluid flow through the heated object, the heated object of the heat dissipation of how much with the fluid flow rate into a certain proportional relationship. Specifically, the flow meter’s sensor has two standard and the RTD, has been used as a heat source, has been used to measure the fluid temperature, the fluid flows through, the heat loss of the heat source and the size of the flow into a non-linear relationship, the thermal gas mass flowmeter can be converted into a measurement of this relationship to measure the flow rate of the signal of the linear output.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure fluid flow. The instrument uses the constant temperature difference method to measure the gas flow accurately. It has the advantages of small size, high digitization, easy installation and accurate measurement. Today we are mainly to talk about the thermal gas mass flowmeter in the installation process need to pay attention to what are?

Thermal gas mass flowmeter due to its various advantages and characteristics, now has been widely used in various industries flow measurement, in the actual measurement of thermal gas flow meter technical advantages are more and more obvious, the following we on the thermal gas mass flowmeter application occasions and some of their own technical advantages do some introduction, hope to be useful to you:

With the development of new energy technology, natural gas is more and more widely used in many new energy industries, and the thermal gas mass flowmeter has become a suitable instrument for measuring high pressure gas measurement. Below we analyze from the perspective of product performance and installation cost, why the thermal gas mass flowmeter can become a suitable low degree meter in high pressure natural gas measurement.

How to improve the accuracy of thermal gas mass flow meter?

In practical applications, thermal mass flowmeters require careful attention to various factors to ensure accurate and reliable measurement of fluid flow rates. Here are some key considerations for the practical application of thermal mass flowmeters:

Choosing the correct installation direction for a thermal gas mass flowmeter is essential for optimal performance and accurate measurement. The installation direction should be determined based on factors such as the flow profile, flow conditions, and manufacturer recommendations. Here are some guidelines to help you choose the appropriate installation direction for a thermal gas mass flowmeter:

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

Common faults encountered with thermal mass flowmeters can disrupt their accurate measurement capabilities. Here are some typical issues along with potential solutions:

Thermal mass flowmeters offer several advantages and disadvantages, which are important to consider when selecting a flow measurement solution. Here are some of the key advantages and disadvantages:

The thermal gas flowmeter has many remarkable characteristics, which make it widely used in the field of gas flow measurement. The following are the main features of thermal gas flowmeters:

Thermal gas mass flow meter is used to measure and control the gas mass flow meter, different from other gas flow meters, do not need to carry out pressure and temperature correction, directly measure the gas mass flow.

1. Principle of thermal gas mass flowmeter

Thermal gas mass flowmeter The thermal distributed flowmeter uses the flow fluid to transfer heat to change the heat conduction distribution effect of measuring the temperature distribution of the tube wall. 2) King’s Law using the heat dissipation (cooling) effect. And because the structure of the detection element extends into the measuring tube, also known as immersion or intrusion type. Some instruments that are inserted from outside the tube into the process tube when in use are called plug-in.

In order to solve the problem of leakage caused by poor measurement accuracy or inability to measure below the lower limit of the instrument, a new type of thermal gas mass flowmeter is developed based on the theory of forced convection heat transfer and the principle of hot wire anemometer. The sensitivity of the instrument is greatly improved and the dead zone of the instrument is reduced by using microfilament structure in the sensitive element and the velocity measuring heating element.

Thermal gas mass flowmeter has a wide range of applications in many fields, its high precision, rapid response and stability characteristics make it in a variety of gas flow measurement occasions can play an excellent performance, for the development of various industries to provide more reliable technical support.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure fluid flow. The instrument uses the constant temperature difference method to measure the gas flow accurately. It has the advantages of small size, high digitization, easy installation and accurate measurement.

In the industrial field, companies need to use natural gas, hydrogen and other gas in many process production, sometimes also need oxygen, nitrogen, argon and other made of gas, this part of the gas cost needs to be controlled and monitored, and the selection of monitoring instruments need to consider various issues:

One of the key advantages of thermal mass flow meters is their quick response time, enabling real-time monitoring and control of gas flow in dynamic processes. Moreover, these meters are known for their low pressure drop, minimizing energy consumption and preserving the efficiency of the overall system. With no moving parts, thermal mass flow meters also offer low maintenance requirements, reducing downtime and operational costs for industries relying on precise gas flow measurements.

Response speed: 1s
Output signal: 4-20mA (Photoelectric isolation, large load 500Ω)、
pulse、RS-485 (photoelectric isolation)、HART agreement
Alarm: 1-2 relay normally open contact、10A/220V/AC、*/30V/DC
Type of supply: Separate structure, integrated structure
Pipe material: Carbon steel, stainless steel, plastic, etc
Field display: Four lines of Chinese liquid crystal display
Display content: Mass flow, standard volume flow, cumulative flow, standard time, cumulative running time, standard flow rate, etc
Protection grade: IP65
Sensor material: Stainless steel Stainless steel, carbon steel

When applying a thermal mass flowmeter, several key points need to be considered to ensure accurate and reliable measurement. Here are some important factors to pay attention to:

The origin of the thermal gas mass flowmeter is from the hot wire anemometer. The temperature of the platinum heating wire has a proportional relationship with the change in the flow rate of the fluid: the faster the flow rate, the more heat is taken away.

In-line thermal mass flowmeter is equipped with the same process pipe with the same inner diameter as the field pipe. The connection with the field pipe is flange connection or thread connection. Pipe segment sensor applicable pipe diameter: DN15 ~ 2000mm.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

Thermal gas mass flowmeter adopts the principle of thermal diffusion, and thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Thermal gas mass flowmeters are a type of mass flowmeter specifically designed for measuring the flow rate of gases, while mass flowmeters, in a broader sense, can measure the flow rate of both gases and liquids. Here are some key differences between thermal gas mass flowmeters and other types of mass flowmeters:

Like the flue gas, this medium has a higher temperature, contains more impurities such as solid dust, the general application of large caliber, flow rate range is relatively wide, so the measurement is more difficult, so in the selection and use of flue gas flow timing should pay attention to the characteristics of the power plant flue wind speed, pay attention to the principle of choosing sensors, It is also necessary to pay attention to the wear resistance, corrosion resistance, dirt resistance and high temperature resistance of the sensor, and select the appropriate measurement position to ensure the measurement accuracy.