What are the characteristics of gas turbine flowmeter

Turbine flowmeter interference fault phenomenon, fault causes and elimination methods

Gas turbine flowmeter is a kind of precision flow measurement instrument, which is widely used in the flow measurement of various gases in industrial pipelines. The media it can measure mainly include but are not limited to the following:

Nominal diameter: DN50-DN400
Functional application: Mainly used for trade settlement, mobile prepaid system, remote meter reading
Advantages and characteristics: Low starting flow, good repeatability, small pressure loss
Applicable medium: Natural gas, compressed air, nitrogen, etc

The selection of a suitable turbine flowmeter is very important for use, the selection of turbine flowmeter should be determined according to the physical and chemical properties of the measured body medium, and to make the flowmeter diameter, flow range, lining materials, electrode materials and output current, etc., can adapt to the nature of the measured body and flow measurement requirements. Here’s a closer look:

In order to ensure the long-term normal operation of the gas turbine flowmeter, it is necessary to check the running status of the flowmeter frequently, do maintenance work, and eliminate problems in time.

The selection of gas turbine flowmeter should be considered from the following aspects:

The selection of gas turbine flowmeter can be considered from the following aspects:

Gas turbine flow meter installation precautions

Nominal diameter: DN50-DN400
Functional application: Mainly used for trade settlement, mobile prepaid system, remote meter reading
Advantages and characteristics: Low starting flow, good repeatability, small pressure loss
Applicable medium: Natural gas, compressed air, nitrogen, etc

Nominal diameter: DN50-DN400
Functional application: Mainly used for trade settlement, mobile prepaid system, remote meter reading
Advantages and characteristics: Low starting flow, good repeatability, small pressure loss
Applicable medium: Natural gas, compressed air, nitrogen, etc

There are many things to pay attention to in the installation of the temperature and pressure compensation gas turbine flowmeter, such as: the need for good grounding, the need to install filters during installation and the requirements of the installation environment, etc., only we really understand its installation precautions, can effectively ensure the measurement accuracy and service life of the gas turbine flowmeter.

There are many things that need to be paid attention to in the installation of gas turbine flowmeter, such as: the need for good grounding, the need to install filters during installation and the requirements of the installation environment, etc. Only when we really understand its installation precautions, can we effectively ensure the measurement accuracy and service life of gas turbine flowmeter.

Gas flowmeter has the characteristics of high measurement accuracy, wide range, low power consumption, easy installation, simple operation, can measure the working condition volume flow or standard volume flow, in the industrial installation process can be installed horizontally, can also be installed vertically, so it is widely used in various fields of industrial production.

For the selection of gas turbine flowmeter, please consider from the following aspects:

Gas turbine flowmeter common problem solution

Biogas is a mixture of gases, according to the fermentation raw materials and fermentation time, the composition of the gas is different, but its main components are methane and carbon dioxide.

Customers choose flow timing selection for the site is a very important step, need to consider the actual conditions of the site to choose the more appropriate metering instrument, the following small series and share with you about the selection of gas flow meter need to consider factors:

Turbine flowmeter has become one of the indispensable measuring instruments, turbine flowmeter selection, need to pay attention to the following points.

Biogas is a mixture of gases, according to the fermentation raw materials and fermentation time, the composition of the gas is different, but its main components are methane and carbon dioxide. In the normal stable gas production stage, methane accounts for 45% to 60% of the total gas volume, carbon dioxide accounts for 35% to 45%, and also contains a small amount of water vapor, hydrogen sulfide, hydrogen, carbon monoxide, ammonia, hydrocarbons, nitrogen, oxygen and methylmercaptan, in addition to containing a small amount of granular impurities.

In order to ensure the long-term normal operation of the gas turbine flowmeter, it is necessary to regularly check the operating status of the gas turbine flowmeter, do maintenance work, and eliminate problems in time.

In the purchase of gas flow timing, users often only pay attention to the caliber, temperature, pressure, flow and other necessary parameters, rarely to measure the medium to further understand, which undoubtedly increases the difficulty of the selection of gas flow meters, once the selection of incorrect meters measurement accuracy will be greatly affected.

Nominal diameter: DN50-DN400
Functional application: Mainly used for trade settlement, mobile prepaid system, remote meter reading
Advantages and characteristics: Low starting flow, good repeatability, small pressure loss
Applicable medium: Natural gas, compressed air, nitrogen, etc

The accuracy of gas flow meters is a relatively complex issue, because it is affected by many factors, including the type of flow meter, the environment of use, the flow measurement range, and the technical level of the manufacturer. The following are some detailed explanations of the accuracy of gas flowmeters:

The selection of gas turbine flow meter should be considered from the following aspects:

Aister instrument natural gas flowmeter manufacturer introduction and selection suggestions

Gas turbine flowmeter is a new generation of high-precision and high-reliability gas precision metering instrument, which has been optimized and designed by absorbing advanced technology of flow meters at home and abroad, and has integrated theories of aerodynamics, hydrodynamics and electromagnetism.

There are many types of gas flow meters that can adapt to a variety of different environments, so what aspects of gas flow timing should we consider? Below we will introduce the knowledge of gas flow meter purchase for you.

Gas turbine flowmeter is a gas medium measurement instrument especially common in industrial production, its working principle is: the measured gas entering the flowmeter, accelerated by the deflector frame of cross-section shrinkage, through the inlet channel acting on the turbine blade, driving the impeller rotation. The impeller shaft is installed on the rolling bearing, and the number of impeller revolutions proportional to the volume of the measured gas is transmitted to the counter or flow computer after multiple decelerations to display the volume of the measured gas under actual conditions. In order to keep the instrument in a normal and stable working state, attention should be paid not only to the initial selection, but also to the correct and standardized operation in the subsequent installation and maintenance operations.

Gas turbine flowmeter has high measurement accuracy and stable performance, so it can be seen in many applications with high configuration requirements. Today, the flowmeter manufacturer Qingtian Instrument Xiaobian mainly to talk with you about some problems encountered in the application process of gas turbine flowmeter and the corresponding treatment methods.

Nominal diameter: DN50-DN400
Functional application: Mainly used for trade settlement, mobile prepaid system, remote meter reading
Advantages and characteristics: Low starting flow, good repeatability, small pressure loss
Applicable medium: Natural gas, compressed air, nitrogen, etc