Ultrasonic flow meter selection needs to know those parameters

Measuring range ±0.03 ft/s ~ ±40 ft/s (±0.01 m/s~ ±12 m/s)
Accuracy ±1%
Diameter range 1″~48″(25mm~1200mm)
Measuring medium Single conducting liquid medium
Measurable pipe Carbon steel, stainless steel, PVC pipe or other dense sound conductive pipe
Output Analog output: 4~20mA, maximum load 750Ω, Modbus: RS485
SD card storage 16G
Set the storage interval 1 ~ 99999 s
Keyboard Digital film keying
Display screen  240*128 LCD display (with backlight)
Power source Rechargeable lithium battery with 3000mAh battery capacity. Under normal use, a full charge can be used for 16 hours.
Operating temperature Transmitter: -40℃~ 60 ℃, sensor: -40℃~80℃, standard type; The range from -40 ° C to 130 ° C is optional
Measure the ambient relative humidity 0-99%
Protection class Transmitter IP65, sensor IP68
Cable Twisted pair shielded cable, standard length of 5 meters

The various advantages of ultrasonic flowmeter we don’t talk about today, today the flowmeter manufacturer Aister meter mainly for you to briefly introduce the ultrasonic flowmeter after the use of maintenance problems, we should not put a lot of time and money on the cost of here, I hope to help you, there is a need to collect.

Ultrasonic flowmeter is a non-contact flow measuring instrument, which has developed rapidly in the past 20 years and has become an indispensable flowmeter in flow measuring instruments.

Ultrasonic flowmeter in the industrial automation more and more wide range of use, many owners in the purchase of ultrasonic flowmeter, will encounter some easy to ignore in the selection of parameters, in view of this phenomenon, Aister instrument to give you a few ultrasonic flowmeter selection needs some parameters.

Ultrasonic flowmeter has the advantage of its working principle. In the large pipeline water flow measurement has a large proportion, today the ultrasonic flowmeter manufacturer Aister for the installation method and main points of the external clamp ultrasonic flowmeter for you to make the following explanation.

Measuring medium: single sound conducting liquid medium
Measuring range: ± 0.03ft /s~ ± 40ft /s (± 0.01m /s~ ± 12m /s)
Accuracy class: ±1%
Pipe diameter range: 1″~48″(25mm~1200mm)
Handheld (portable) ultrasonic flowmeter with external clip-on sensing to measure liquid flow. The installation process is extremely simple, and the all-Chinese man-machine interface makes it easier to operate.

Ultrasonic flowmeters are well-suited for measuring the flow of clean liquids in a variety of industrial applications. Clean liquids, such as water, chemicals, or other non-viscous fluids, allow ultrasonic signals to propagate through the medium more effectively, resulting in accurate flow measurements. Here are some considerations for using ultrasonic flowmeters with clean liquids:

Ultrasonic flowmeter in the use of the process, encountered failures are more common, today the flowmeter manufacturer Aister meter in the form of questions and answers to make the common problems of ultrasonic flowmeter to sort out, hope to help you.

Ultrasonic flowmeters are instruments that measure flow by detecting the effect of fluid flow on an ultrasonic beam (or ultrasonic pulse). The ultrasonic flowmeter is mainly composed of an ultrasonic transducer (or an ultrasonic flow sensor composed of a transducer and a measuring tube) and a transducer mounted on the measuring pipe.

Measuring medium: single sound conducting liquid medium
Measuring range: ± 0.03ft /s~ ± 40ft /s (± 0.01m /s~ ± 12m /s)
Accuracy class: ±1%
Pipe diameter range: 1″~48″(25mm~1200mm)

The pharmaceutical and chemical industries also benefit significantly from ultrasonic flow meters. In these sectors, where precise measurement of liquid chemicals is crucial for manufacturing processes, ultrasonic flow meters offer a reliable and contamination-free solution. Their non-invasive nature is particularly advantageous when dealing with sensitive or hazardous substances, ensuring the integrity of the product while maintaining operational efficiency.

The correct selection of ultrasonic flowmeter can ensure the better use of ultrasonic flowmeter. What kind of ultrasonic flowmeter should be selected should be determined according to the physical and chemical properties of the measured flow medium. Today, flowmeter manufacturers tell you what to pay attention to before choosing ultrasonic flowmeter

What are the common failures caused by improper installation of ultrasonic flowmeter? Today, flowmeter manufacturer Aister meter collected the fault performance and treatment methods, and it can be collected if necessary.

In the face of many types of ultrasonic flowmeters, users should choose a reasonable selection according to the actual situation and measurement needs. Today, the flowmeter manufacturer Aister meter gives you a detailed introduction to the selection of ultrasonic flowmeters with different installation methods.

Ultrasonic flowmeters can be used to measure the flow of fluids and large pipe runoff that are not easily accessible. In practical applications, if the temperature, pressure, the nature of the medium and other conditions are different from the calibration, it is necessary to calibrate the ultrasonic flowmeter, today we talk about the calibration method.

Ultrasonic flowmeter is a non-contact flow measuring instrument, which has developed rapidly in the past 20 years and has become an indispensable flowmeter in flow measuring instruments.

The installation of ultrasonic flowmeter is relatively simple and fast compared with other meters. However, the flowmeter manufacturer has to remind you that no matter how well the flowmeter is installed, it should also follow the installation requirements during the installation process.

Correction methods for ultrasonic flowmeters are essential to ensure accurate and reliable measurements. Here are some specific correction methods commonly used in practice:

Ultrasonic flowmeter installation, easy maintenance, cost-effective. However, no matter how good the flowmeter is, it also needs special attention in daily use. Otherwise, it will affect the measuring accuracy and service life of the flowmeter. Today, flowmeter manufacturer Aister meter mainly explains the maintenance and maintenance of ultrasonic flowmeters as follows.

The selection of ultrasonic flowmeter should pay attention to several problems

Ultrasonic flowmeter in view of different installation methods, then the requirements for installation are also different, today the flowmeter manufacturer Aister meter mainly for the installation requirements of different installation methods of ultrasonic flowmeter, for you to make the following explanation.

Ultrasonic flowmeter is cost-effective, easy to install and maintain. Today, flowmeter manufacturer Aister meter makes the following guidance for you on the installation of ultrasonic flowmeter.

The installation of the ultrasonic flowmeter is simple and convenient in the installation of all flowmeters, as long as you choose a suitable measuring point, input the pipe parameters at the measuring point into the flowmeter, and then fix the probe on the pipe. Today, flowmeter manufacturer Aister instrument makes the following analysis for you on this topic.

Under the premise of fixed installation conditions, ultrasonic flowmeter improves the signal processing capacity and diagnostic capacity of the flowmeter itself, and can effectively reduce noise. Under normal circumstances, the measuring accuracy of the flowmeter is very important.

ultrasonic flow meters find applications in HVAC systems for measuring the flow of heating or cooling fluids. Their non-intrusive installation makes them an ideal choice for retrofits and upgrades to existing systems, allowing for accurate measurement without disrupting the infrastructure. This application contributes to the efficient operation of HVAC systems, optimizing energy consumption and ensuring optimal environmental conditions in buildings.

Pipe Size: DN25-DN1200mm (1”~48”)
Fluid: Single medium liquid
Temperature: -40℃~80℃ (standard), -40℃~130℃ (optional)
Accuracy: ±1% of measured value
Flow Range: ±0.01 m/s~ ±12 m/s

In the energy sector, particularly in the oil and gas industry, ultrasonic flow meters are widely used to measure the flow rates of hydrocarbons in pipelines. These meters offer a non-intrusive solution for accurately monitoring oil and gas flows, ensuring precise measurement without the need for cutting into pipelines. The ability to operate in challenging environments, such as high-pressure pipelines, makes ultrasonic flow meters suitable for upstream and downstream applications, providing essential data for process control and optimization.

Ultrasonic flowmeter installation, use and maintenance is simple and fast, but there are still some points can not be ignored, today the flowmeter manufacturer Aister meter for the maintenance of ultrasonic flowmeter points to make the following explanation.

After having a corresponding understanding of the working principle and application of the ultrasonic flowmeter, what we now need to understand is that in its application of a variety of occasions and various fields to measure user flow, and after the application, we will have to do maintenance for it?

Measuring medium: single sound conducting liquid medium
Measuring range: ± 0.03ft /s~ ± 40ft /s (± 0.01m /s~ ± 12m /s)
Accuracy class: ±1%
Pipe diameter range: 1″~48″(25mm~1200mm)
Handheld (portable) ultrasonic flowmeter with external clip-on sensing to measure liquid flow. The installation process is extremely simple, and the all-Chinese man-machine interface makes it easier to operate.