Tri Clamp Water Milk Flow Sensor RS485 Modbus Electromagnetic Flow Meter

Electromagnetic flowmeter is a widely used flow meter, in the process of use will inevitably appear some failures, then how to check the cause of the failure and eliminate it, the next Aister to teach you several simple troubleshooting methods.

Electromagnetic flow meters operate based on a fundamental principle of electromagnetic induction, providing an accurate and reliable method for measuring the flow of conductive fluids. The working principle involves Faraday’s law of electromagnetic induction. As a conductive fluid flows through a pipe, it cuts across the magnetic field generated by coils or electrodes mounted on the flow meter. According to Faraday’s law, an electromotive force (EMF) is induced in the fluid perpendicular to both the magnetic field and the flow direction. The induced EMF is directly proportional to the flow velocity of the fluid.

Electromagnetic flowmeter is a kind of instrument to measure the flow of conductive fluid by using Faraday’s law of electromagnetic induction according to the electromotive force generated by the flow cutting magnetic field line. The common faults of electromagnetic flowmeter are: no display, inaccurate flow measurement, air traffic control alarm, system alarm, upper and lower limit alarm, etc.

The versatility of electromagnetic flowmeters is a testament to their robust performance across a wide range of conductive liquids. Whether dealing with water, acids, bases, or slurries, these flowmeters maintain their accuracy and reliability. This adaptability is particularly valuable in industries with varying fluid compositions, allowing for a single flowmeter type to be employed in diverse applications without sacrificing performance.

Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse
Communication: RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply: AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption: <20W Alarm: Upper Limit Alarm / Lower Limit Alarm Self-diagnosis: Empty Pipe Alarm, Exciting Alarm Explosion Proof: ATEX

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

The working principle of electromagnetic flow meter:

Intelligent electromagnetic flowmeters are mainly used to measure the volume flow of conductive liquid and slurry in closed pipelines, including acid, alkali, salt and other highly corrosive liquids.

Basic fault treatment of intelligent sewage electromagnetic flowmeter:

The installation distance between an electromagnetic flowmeter and a control valve, especially a rear valve, is a critical factor that can impact the accuracy and reliability of flow measurements. Here are some general guidelines to help determine the appropriate installation distance:

The electrode is the main part of the electromagnetic flowmeter used to measure the liquid flow, therefore, the choice of normal electrode material is directly related to the accuracy of the measurement and the price of the electromagnetic flowmeter.

What are the requirements for the installation environment of the electromagnetic flow meter?

High voltage electromagnetic flowmeters are commonly used in applications where the measurement of electrically conductive fluids is required. These flowmeters operate based on Faraday’s law of electromagnetic induction and are suitable for a variety of industrial processes. Here are some key application characteristics of high voltage electromagnetic flowmeters:

Electromagnetic flowmeter is widely used in the industrial field, in order to make the electromagnetic flowmeter work stable and reliable, accurate measurement, installation needs to be installed in accordance with the correct method.

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

The choice of water flow meter is a comprehensive consideration process, involving many aspects of factors. Here is a guide to tap water flow meter selection to help you choose the most suitable solution:

Dealing with a weak signal issue in an intelligent electromagnetic flowmeter is crucial to ensure accurate and reliable flow measurements. Weak signals can be caused by various factors, and addressing them requires a systematic troubleshooting approach. Here are some steps to help you diagnose and resolve the weak signal phenomenon:

The plug-in electromagnetic flowmeter has a wide range of applications, and can be used to measure the volume flow of conductive liquid and slurry in closed pipelines in many fields such as petroleum, chemical industry, metallurgy, paper making, environmental protection, municipal management, water conservancy construction and so on.

In the field of industrial processes, electromagnetic flowmeters are extensively employed for measuring the flow of liquids such as chemicals, acids, and slurries. Their capability to handle corrosive fluids and resist wear makes them invaluable in industries like chemical manufacturing, pharmaceuticals, and food and beverage production. In these applications, electromagnetic flowmeters contribute to process optimization, ensuring precise control of fluid volumes and enhancing overall operational efficiency.

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
Accuracy: +/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode: SUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium
Structure Type: Integral type, remote type, submersible type, ex-proof type
Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range： Max 15m/s
Conductivity： >5us/cm

What are the advantages of electromagnetic flowmeter measurement for sewage measurement? The plug-in electromagnetic flowmeter is composed of two parts: flow sensor and transmitter.

Electromagnetic flowmeter installation instructions, how to install electromagnetic flow meter?

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s
Electromagnetic flow meter is one of the most popular flow meters. Flange type electromagnetic flow meter has been used for more than 50 years worldwide. It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc.

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

Several electromagnetic flowmeters are used in the gasification unit, and the faults encountered during the test run of the gasification unit are as follows:

Electromagnetic flowmeter plays a multi-faceted role in farmland irrigation, mainly reflected in the following aspects:

Once the installation location is determined, the next step is preparing the piping system. Ensure that the pipeline is clean and free from debris that could interfere with the operation of the flowmeter. In some cases, straight pipe runs are recommended both upstream and downstream of the flowmeter to allow for proper fluid flow development and stabilization. This helps in achieving optimal measurement accuracy.

The electromagnetic flowmeter should be installed with the flow direction aligned with the arrow on the flowmeter body. Proper orientation ensures that the magnetic field generated by the flowmeter’s coils is perpendicular to the fluid flow, allowing for accurate measurements. Additionally, it is essential to properly ground the flowmeter to minimize electrical noise and interference, ensuring the stability of the measurement signals.

The installation process involves securely mounting the flowmeter on the piping system using appropriate brackets or supports. Care should be taken to align the flowmeter properly and tighten all connections to prevent leaks. Adequate sealing measures must be implemented to prevent ingress of moisture or contaminants into the flowmeter, which could adversely affect its performance.

Electromagnetic flowmeters, also known as magmeters or magnetic flowmeters, are widely used for measuring the flow rate of conductive liquids in various industries. Several factors can influence the accuracy of electromagnetic flowmeters. Understanding and addressing these factors are essential to ensure precise and reliable flow measurements. Here are some key factors that can affect the accuracy of electromagnetic flowmeters:

Non-full tube electromagnetic flowmeter is an advanced flow measuring instrument, especially suitable for measuring the flow of non-full tube or partially filled fluid, such as municipal rainwater, wastewater, sewage and so on. The following is a detailed introduction to the non-full tube electromagnetic flowmeter:

Electromagnetic flowmeters exhibit remarkable performance even in challenging environmental conditions. Their construction materials are often chosen for their corrosion resistance, enabling these devices to withstand harsh chemicals and extreme temperatures. This robustness ensures continuous and reliable operation, making electromagnetic flowmeters suitable for demanding industrial applications where other flow measurement devices might struggle to perform consistently.

Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s
Conductivity: >5us/cm
Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse

What are the external interference problems of the electromagnetic flowmeter for domestic wastewater

Electromagnetic flow meter is one of the most popular flow meters. Flange type electromagnetic flow meter has been used for more than 50 years worldwide. It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc.

Electromagnetic flowmeters are used to measure the volume flow of industrial liquids and there are many media in industrial liquids, electromagnetic flowmeters are often used to measure the flow of conductive media.