Thermal gas mass flow meter applications

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

Thermal gas mass flowmeter adopts the principle of thermal diffusion, and thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions.

Check Power Supply: Ensure that the flowmeter is receiving power from the power supply source. Verify that the power supply is operational, and check the connections between the flowmeter and the power source. If necessary, measure the voltage at the flowmeter terminals to confirm proper power supply.

Common faults encountered with thermal mass flowmeters can disrupt their accurate measurement capabilities. Here are some typical issues along with potential solutions:

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

The thermal gas flowmeter has many remarkable characteristics, which make it widely used in the field of gas flow measurement. The following are the main features of thermal gas flowmeters:

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

At the heart of a thermal mass flow meter is a sensor that heats up a portion of the gas stream while monitoring the temperature difference between the heated and unheated sections. As the gas flows over the heated sensor, it carries away heat, and the temperature difference provides a direct measurement of the mass flow rate. The beauty of this method lies in its ability to provide accurate readings across a wide range of flow rates, from low to high velocities, ensuring versatility and reliability in various industrial settings.

Structural form: plug-in pipelined
Measuring medium: All gases (except acetylene)
Pipe diameter range: Caliber DN32 or higher DN10～DN2000mm
Velocity range: 0.1～120Nm/s
Precision: ±1～2.5%
Operating temperature: Sensor：-40℃～+220℃
convertor：-20℃～+45℃
Working pressure: Medium pressure≤2.5Mpa
Medium pressure≤4.0Mpa
Power supply: DC24V or AC220V≤18W

One of the key advantages of thermal mass flow meters is their quick response time, enabling real-time monitoring and control of gas flow in dynamic processes. Moreover, these meters are known for their low pressure drop, minimizing energy consumption and preserving the efficiency of the overall system. With no moving parts, thermal mass flow meters also offer low maintenance requirements, reducing downtime and operational costs for industries relying on precise gas flow measurements.

Response speed: 1s
Output signal: 4-20mA (Photoelectric isolation, large load 500Ω)、
pulse、RS-485 (photoelectric isolation)、HART agreement
Alarm: 1-2 relay normally open contact、10A/220V/AC、*/30V/DC
Type of supply: Separate structure, integrated structure
Pipe material: Carbon steel, stainless steel, plastic, etc
Field display: Four lines of Chinese liquid crystal display
Display content: Mass flow, standard volume flow, cumulative flow, standard time, cumulative running time, standard flow rate, etc
Protection grade: IP65
Sensor material: Stainless steel Stainless steel, carbon steel

Thermal gas mass flowmeter has certain operating procedures and precautions in use, and must pay attention to these points when in use:

Thermal gas mass flowmeter can be used to measure any gas that does not contain condensed liquid in various shapes and materials (such as round pipe, square pipe, rectangular pipe, etc., diameter from 8mm-10000mm or larger, all kinds of metal, plastic, cement material), it does not need temperature and pressure compensation, directly measure the mass flow of fluid.

The medium of one of the two tubes of the thermal gas mass flowmeter does not flow, and the medium of the other tube flows. By comparing the Coriolis force of two pipes to obtain the flow rate, it is convenient to eliminate the natural vibration of the pipeline, the vibration of the fluid itself and other factors that affect or interfere with the measurement.

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

Thermal mass flowmeters offer several advantages and disadvantages, which are important to consider when selecting a flow measurement solution. Here are some of the key advantages and disadvantages:

Installing and debugging a thermal mass flowmeter correctly in the early stages is crucial to ensure accurate and reliable measurements. Here are some precautions to take during installation and debugging:

Choosing the correct installation direction for a thermal gas mass flowmeter is essential for optimal performance and accurate measurement. The installation direction should be determined based on factors such as the flow profile, flow conditions, and manufacturer recommendations. Here are some guidelines to help you choose the appropriate installation direction for a thermal gas mass flowmeter:

Thermal mass flowmeters are widely used in various industries due to their ability to measure the flow rate of gases accurately. Here are some applications of thermal mass flowmeters across different industries:

Thermal gas mass flowmeter as a gas flowmeter, the application is very wide, today we specifically understand the use of thermal gas mass flowmeter:

The selection of flue gas flowmeter is a complicated but critical process, which is directly related to the accuracy of measurement results and the reliability of equipment. Here are some of the main factors to consider in the selection process:

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow. The most important thing is that the range ratio of this flowmeter is very wide, which greatly meets the measurement needs of the owner.

Direct measurement of gas mass, without temperature, pressure compensation of gas flow measurement instrument, it represents the development trend of gas flow measurement. The thermal mass flowmeter sensor part is composed of two reference platinum resistance temperature sensors, using a bridge loop, one sensor measures the fluid temperature, and the other sensor is a heating element, maintaining a constant temperature difference higher than the fluid temperature, that is, when the gas flows through the heating element, the heat is taken away, and the heat is proportional to the flow rate of the gas and the density of the gas. To maintain a fixed temperature difference between the two temperature sensors requires the circuit to provide more power to the heating element, and the amount of output power in the circuit is related to the mass of the fluid, thus measuring the flow rate.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

In practical applications, thermal mass flowmeters require careful attention to various factors to ensure accurate and reliable measurement of fluid flow rates. Here are some key considerations for the practical application of thermal mass flowmeters:

The thermal gas mass flowmeter is designed based on the principle of thermal diffusion. The meter uses constant temperature difference method to measure the gas accurately. The thermal gas mass flowmeter has the advantages of small volume, high digitization, easy installation and accurate measurement.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument adopts constant temperature difference method for gas mass flow sensor part consists of two reference platinum resistance temperature sensors. Using a bridge loop, one sensor measures the flow temperature and the other maintains a constant temperature difference above the fluid temperature, allowing flow measurement under high temperature and high pressure conditions.

The application of thermal gas mass flow meter in various industries

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure fluid flow. The instrument uses the constant temperature difference method to measure the gas flow accurately. It has the advantages of small size, high digitization, easy installation and accurate measurement.

In order to solve the problem of leakage caused by poor measurement accuracy or inability to measure below the lower limit of the instrument, a new type of thermal gas mass flowmeter is developed based on the theory of forced convection heat transfer and the principle of hot wire anemometer. The sensitivity of the instrument is greatly improved and the dead zone of the instrument is reduced by using microfilament structure in the sensitive element and the velocity measuring heating element.

1. Principle of thermal gas mass flowmeter

Thermal gas mass flowmeter The thermal distributed flowmeter uses the flow fluid to transfer heat to change the heat conduction distribution effect of measuring the temperature distribution of the tube wall. 2) King’s Law using the heat dissipation (cooling) effect. And because the structure of the detection element extends into the measuring tube, also known as immersion or intrusion type. Some instruments that are inserted from outside the tube into the process tube when in use are called plug-in.

Thermal mass flowmeters are known for their ability to provide accurate and reliable measurements of fluid flow rates, regardless of changes in pressure and temperature. This resilience to pressure and temperature variations is due to the operating principle of thermal mass flowmeters and their design features. Here’s why thermal mass flowmeters are not significantly affected by changes in pressure and temperature: