There are some common problems encountered in the use of vortex flow meters

1. After power-on, there is fluid flow in the pipeline, but the vortex flowmeter has no signal output

Reliability is a hallmark of vortex flow meters, as they exhibit robust performance in harsh operating conditions. Their simple yet sturdy design, often featuring no moving parts, results in minimal maintenance requirements and increased longevity. This reliability is particularly crucial in industries where consistent and accurate flow measurement is essential for process control and optimization.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. In addition to the characteristics of the aforementioned vortex flowmeter, it also has the following characteristics:

The vapor flowmeter has no moving parts, strong reliability, high precision, long life, and can measure the instantaneous flow and cumulative flow of liquid in a wide flow range.

The water and wastewater treatment sector also benefits significantly from vortex flow meters. These meters are used to measure the flow of water in pipes, helping to monitor consumption, detect leaks, and optimize water treatment processes. Their robust construction and suitability for both clean and dirty water make vortex flow meters essential tools for managing water resources effectively.

vortex flow meters offer a cost-effective solution for flow measurement. Their relatively simple design, coupled with low maintenance requirements, contributes to a lower total cost of ownership over the life of the instrument. This cost efficiency, combined with their accuracy and reliability, positions vortex flow meters as a favorable choice for industries seeking optimal performance without compromising on budget considerations.

Vortex flowmeter can be widely used in large, medium and small kinds of pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagents and compressed air, saturated and superheated steam, natural gas and various media flow measurement and can be used as a flow transmitter in automatic control system, long service life. Points of attention for vortex flowmeter installation:

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

Vortex steam flowmeter is one of the main flowmeter products, widely used in petroleum, chemical industry, metallurgy, heating and other departments. Test and measure the flow of liquid, gas and steam.

Vortex flowmeter has high requirements for installation and working environment, and the front and rear straight pipe sections must be installed in accordance with the specifications.

Gas flowmeter is a general term for many measurable gas flows. Today, we mainly explain the installation conditions of vortex flowmeter.

There are often some error factors in the calibration and use of flowmeter coefficient, which affect the accuracy of gas metering. The following are the factors that affect the accuracy of the steam flowmeter.

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

Technical requirements and precautions for measuring natural gas with precession vortex flow meter

Precautions for installation and use of vortex flow meter

At present, there are many misunderstandings about steam measurement in China, and many users often think that buying a high-price flowmeter can get accurate measurement results. The measurement of steam is different from other fluids such as water, air and other media, and there are many factors affecting its measurement in the actual measurement. Therefore, there is often a phenomenon that the flow meter itself is qualified, but the actual measurement is not “allowed”. So what’s the problem with these factors?

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)
LUGB flange clamped vortex street steam flowmeter is a commonly used structure, its body itself does not have a connection flange, in connection with the pipe, the flowmeter clamped between two special flanges, and then bolted.

Vortex flow meters offer a host of advantages that make them a preferred choice in various industrial applications. One key advantage is their versatility in measuring the flow of liquids, gases, and steam. Unlike some other flow measurement technologies, vortex flow meters can handle a wide range of fluids, making them suitable for diverse industries such as oil and gas, water treatment, chemical processing, and HVAC systems.

Vortex flowmeter common faults and solutions

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

Measured Medium: Liquid, Gas, Steam
Medium Temp: -40℃~+200℃; -40℃~+280℃; 40℃~+350℃
Nominal Pressure: 1.6MPa;2.5MPa;4.0MPa;6.4MPa(Other pressure can be custom,need consult supplier)
Accuracy: 1.0%(Flange), 1.5%(Insertion)
Material: SS304(Standard), SS316(Optional)

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flowmeters:

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems:

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.

Vortex flowmeter is a kind of instrument device to measure the flow of pipeline fluid, and it works by the principle of velocity vortex. Vortex flowmeter has two kinds of volume and mass flow measurement, which can be selected according to the situation of the field.

With the continuous production progress of the reform and opening up industry, it has been applied in more and more industries, and the vortex flowmeter is widely used in large, medium and small pipeline water supply and drainage, industrial circulation, and sewage treatment.

Vortex flowmeters are versatile instruments commonly used in various industries for fluid flow measurement. Here are some applications of vortex flowmeters in different industries:

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, and relatively high performance price characteristics.

As a very special medium, steam will show special phenomena and problems in the process of vortex flowmeter measurement. The key problem is that the vapor density value deviates too much from the design value, which brings significant measurement errors to the measurement results. At present, the density measuring instrument with mature technology has not been successfully applied, which brings certain difficulties to the steam flow measurement.