thermal air mass flow meter

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow. The most important thing is that the range ratio of this flowmeter is very wide, which greatly meets the measurement needs of the owner.

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

Check Power Supply: Ensure that the flowmeter is receiving power from the power supply source. Verify that the power supply is operational, and check the connections between the flowmeter and the power source. If necessary, measure the voltage at the flowmeter terminals to confirm proper power supply.

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

When applying a thermal mass flowmeter, several key points need to be considered to ensure accurate and reliable measurement. Here are some important factors to pay attention to:

Thermal mass flowmeters offer several advantages and disadvantages, which are important to consider when selecting a flow measurement solution. Here are some of the key advantages and disadvantages:

In-line thermal mass flowmeter is equipped with the same process pipe with the same inner diameter as the field pipe. The connection with the field pipe is flange connection or thread connection. Pipe segment sensor applicable pipe diameter: DN15 ~ 2000mm.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc