pulse output thermal gas mass flow meter

1. Principle of thermal gas mass flowmeter

Thermal gas mass flowmeter The thermal distributed flowmeter uses the flow fluid to transfer heat to change the heat conduction distribution effect of measuring the temperature distribution of the tube wall. 2) King’s Law using the heat dissipation (cooling) effect. And because the structure of the detection element extends into the measuring tube, also known as immersion or intrusion type. Some instruments that are inserted from outside the tube into the process tube when in use are called plug-in.

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

The data show that in the flow measurement failure probability, the improper selection of flowmeter accounts for about 70%, and the quality of flowmeter products or other reasons account for 30%, which shows how important the selection of flow measurement is.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

Choosing the correct installation direction for a thermal gas mass flowmeter is essential for optimal performance and accurate measurement. The installation direction should be determined based on factors such as the flow profile, flow conditions, and manufacturer recommendations. Here are some guidelines to help you choose the appropriate installation direction for a thermal gas mass flowmeter:

Installing and debugging a thermal mass flowmeter correctly in the early stages is crucial to ensure accurate and reliable measurements. Here are some precautions to take during installation and debugging:

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

When applying a thermal mass flowmeter, several key points need to be considered to ensure accurate and reliable measurement. Here are some important factors to pay attention to:

Common faults encountered with thermal mass flowmeters can disrupt their accurate measurement capabilities. Here are some typical issues along with potential solutions:

In-line thermal mass flowmeter is equipped with the same process pipe with the same inner diameter as the field pipe. The connection with the field pipe is flange connection or thread connection. Pipe segment sensor applicable pipe diameter: DN15 ~ 2000mm.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

The thermal mass flowmeter is an device for measuring gas flow by using the principle of thermal diffusion. The sensor consists of two reference thermal resistors (RTDS). One is the speed sensor RH, and the other is the temperature sensor RMG, which measures the temperature change of the gas. When the two RTDS are placed in the measured gas, one sensor RH is heated and the other sensor RMG is used to sense the measured gas temperature. As the gas flow rate increases, the airflow carries away more heat, and the temperature of the sensor RH drops.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

The thermal mass flowmeter is a flow meter based on the principle of thermal diffusion. The device uses the constant temperature difference method to measure the gas accurately. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc