LCD display thermal gas mass flow meter

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow. The most important thing is that the range ratio of this flowmeter is very wide, which greatly meets the measurement needs of the owner.

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

Check Power Supply: Ensure that the flowmeter is receiving power from the power supply source. Verify that the power supply is operational, and check the connections between the flowmeter and the power source. If necessary, measure the voltage at the flowmeter terminals to confirm proper power supply.

Installing and debugging a thermal mass flowmeter correctly in the early stages is crucial to ensure accurate and reliable measurements. Here are some precautions to take during installation and debugging:

When applying a thermal mass flowmeter, several key points need to be considered to ensure accurate and reliable measurement. Here are some important factors to pay attention to:

One of the key advantages of thermal mass flow meters is their quick response time, enabling real-time monitoring and control of gas flow in dynamic processes. Moreover, these meters are known for their low pressure drop, minimizing energy consumption and preserving the efficiency of the overall system. With no moving parts, thermal mass flow meters also offer low maintenance requirements, reducing downtime and operational costs for industries relying on precise gas flow measurements.

Response speed: 1s
Output signal: 4-20mA (Photoelectric isolation, large load 500Ω)、
pulse、RS-485 (photoelectric isolation)、HART agreement
Alarm: 1-2 relay normally open contact、10A/220V/AC、*/30V/DC
Type of supply: Separate structure, integrated structure
Pipe material: Carbon steel, stainless steel, plastic, etc
Field display: Four lines of Chinese liquid crystal display
Display content: Mass flow, standard volume flow, cumulative flow, standard time, cumulative running time, standard flow rate, etc
Protection grade: IP65
Sensor material: Stainless steel Stainless steel, carbon steel

Direct measurement of gas mass, without temperature, pressure compensation of gas flow measurement instrument, it represents the development trend of gas flow measurement. The thermal mass flowmeter sensor part is composed of two reference platinum resistance temperature sensors, using a bridge loop, one sensor measures the fluid temperature, and the other sensor is a heating element, maintaining a constant temperature difference higher than the fluid temperature, that is, when the gas flows through the heating element, the heat is taken away, and the heat is proportional to the flow rate of the gas and the density of the gas. To maintain a fixed temperature difference between the two temperature sensors requires the circuit to provide more power to the heating element, and the amount of output power in the circuit is related to the mass of the fluid, thus measuring the flow rate.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc