gas flow meter manufacturer

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

In the industrial field, companies need to use natural gas, hydrogen and other gas in many process production, sometimes also need oxygen, nitrogen, argon and other made of gas, this part of the gas cost needs to be controlled and monitored, and the selection of monitoring instruments need to consider various issues:

The thermal gas mass flowmeter uses the principle of thermal diffusion, and its working principle determines the change of the measured medium gas with the temperature and pressure, which affects the data change of the measured results.

The characteristics and installation and maintenance methods of precession vortex flow meter

The origin of the thermal gas mass flowmeter is from the hot wire anemometer. The temperature of the platinum heating wire has a proportional relationship with the change in the flow rate of the fluid: the faster the flow rate, the more heat is taken away.

Due to the continuous development of thermal gas mass flow meter is based on the principle of thermal diffusion, that is, the use of fluid flow through the heated object, the heated object of the heat dissipation of how much with the fluid flow rate into a certain proportional relationship. Specifically, the flow meter’s sensor has two standard and the RTD, has been used as a heat source, has been used to measure the fluid temperature, the fluid flows through, the heat loss of the heat source and the size of the flow into a non-linear relationship, the thermal gas mass flowmeter can be converted into a measurement of this relationship to measure the flow rate of the signal of the linear output.

Vortex flowmeter is one of the commonly used instruments in daily production, therefore, failure will occur from time to time, the main reasons for the inaccurate flow accuracy of the vortex include: the influence of temperature on the measurement, the influence of the accumulation of the vortex generating body on the flow surface, the influence caused by the inconsistency between the distribution tube and the inner flow meter.

To play a greater role, the vortex flowmeter must be correctly selected, and the selection is mainly judged by the temperature, pressure, flow rate of the medium, interference and other problems in the working condition.

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flow meters:

Like the flue gas, this medium has a higher temperature, contains more impurities such as solid dust, the general application of large caliber, flow rate range is relatively wide, so the measurement is more difficult, so in the selection and use of flue gas flow timing should pay attention to the characteristics of the power plant flue wind speed, pay attention to the principle of choosing sensors, It is also necessary to pay attention to the wear resistance, corrosion resistance, dirt resistance and high temperature resistance of the sensor, and select the appropriate measurement position to ensure the measurement accuracy.

How to improve the accuracy of thermal gas mass flow meter?

The thermal gas mass flowmeter is designed based on the principle of thermal diffusion. The meter uses constant temperature difference method to measure the gas accurately. The thermal gas mass flowmeter has the advantages of small volume, high digitization, easy installation and accurate measurement.