4-20mA vortex flow sensor

Vortex flowmeter is a velocity flowmeter, which measures the volume flow rate in the working state. If you choose the table according to the volume flow rate, the mass flow rate provided by the customer should be converted into the volume flow rate under the working state, and then determine the diameter of the selected instrument against the volume flow parameter.

1. Vibration effect

Compressed air is generated by air compressor or high pressure fan. When these devices are in operation, they all have varying degrees of vibration, and sometimes the vibration is relatively strong, and this vibration is transmitted through the connecting pipe. When selecting and determining the position of the vortex flowmeter, this influencing factor should be fully considered. In various detection methods, the anti-vibration performance of the instrument is not the same due to different detection components. For the vortex street of the detection element, the vibration resistance can reach 0.5~1G. When determining the installation position of the vortex flowmeter, it should be as far away from the power equipment such as air compressors and fans as possible.

The working principle of vortex flowmeter is to place a non-streamlined vortex generator in the fluid, so that the fluid is alternately separated on both sides of the generator, releasing two series of regularly staggered vortex flowmeter. In a certain range, the vortex separation frequency is proportional to the flow rate, and the vortex flowmeter can measure the flow rate of the medium by calculating the vortex separation frequency.

Vortex flowmeter is a commonly used flow meter, the use of any instrument is inseparable from daily maintenance and maintenance, whether it is its own failure or interference by external factors, we calmly respond to the occurrence of failure.