Steam Flow Meter Temperature and Pressure Compensation Vapor Mass Flowmeter

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

Vortex flowmeter is a new type flowmeter for measuring fluid flow in closed pipeline according to Karman vortex principle. It is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions.

When choosing the right ammonia flow meter for you, several factors need to be considered to ensure the accuracy of the measurement results and the reliability of the equipment. Here’s a detailed buying guide:

vortex flow meters offer a cost-effective solution for flow measurement. Their relatively simple design, coupled with low maintenance requirements, contributes to a lower total cost of ownership over the life of the instrument. This cost efficiency, combined with their accuracy and reliability, positions vortex flow meters as a favorable choice for industries seeking optimal performance without compromising on budget considerations.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. There are no moving mechanical parts, so the reliability is high, the maintenance is small, and the instrument parameters can be stable for a long time.

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flow meters:

Vortex flowmeters are versatile instruments commonly used in various industries for fluid flow measurement. Here are some applications of vortex flowmeters in different industries:

There are many types of flow meters for measuring nitrogen, and each type has its specific application scenarios and advantages. Here are some common nitrogen flowmeters:

Vortex flowmeters are not only suitable for measuring a variety of low viscosity liquids, but also mainly for industrial measurement of gases and vapors. When measuring the volume flow of gas, vortex flowmeters are not affected by changes in fluid temperature, pressure, density, viscosity and other properties, so the measurement is very accurate and is the first choice for measuring air.

When selecting the right air flow meter product, a number of factors need to be considered to ensure that the selected product can meet the actual needs and has good performance. Here is a detailed buying guide to help you choose the best air flowmeter:

Vortex steam flowmeter is one of the main flowmeter products, widely used in petroleum, chemical industry, metallurgy, heating and other departments. Test and measure the flow of liquid, gas and steam.

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems:

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

One of the notable advantages of vortex flow meters is their versatility, as they can be employed in a wide range of applications across different industries. They are particularly useful for measuring the flow of fluids with varying viscosities, making them suitable for applications in petrochemical, pharmaceutical, and water treatment industries. Additionally, vortex flow meters are known for their ability to handle both high and low-flow conditions with consistent accuracy, providing reliable measurements across a broad operational range.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Whether the temperature and pressure compensation is required for steam measurement by vortex flowmeter mainly depends on the properties of the steam being measured and the requirements of measurement accuracy.

Vortex flow meters are highly versatile instruments widely utilized in various industrial applications to measure the flow of liquids, gases, and steam. One prominent application of vortex flow meters is in the oil and gas industry, where they play a crucial role in measuring the flow rates of hydrocarbons through pipelines. These meters are particularly adept at handling the challenging conditions present in oil and gas operations, including high pressures and temperatures. By accurately measuring flow rates, vortex flow meters contribute to efficient process control and optimization, ensuring that production and transportation systems operate smoothly and cost-effectively.

Measured Medium: Liquid, Gas, Steam
Medium Temp: -40℃~+200℃; -40℃~+280℃; 40℃~+350℃
Nominal Pressure: 1.6MPa;2.5MPa;4.0MPa;6.4MPa(Other pressure can be custom,need consult supplier)
Accuracy: 1.0%(Flange), 1.5%(Insertion)
Material: SS304(Standard), SS316(Optional)

Vortex flowmeter can be widely used in large, medium and small kinds of pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagents and compressed air, saturated and superheated steam, natural gas and various media flow measurement and can be used as a flow transmitter in automatic control system, long service life. Points of attention for vortex flowmeter installation:

Vortex flowmeter is a commonly used flow meter, the use of any instrument is inseparable from daily maintenance and maintenance, whether it is its own failure or interference by external factors, we calmly respond to the occurrence of failure.

To play a greater role, the vortex flowmeter must be correctly selected, and the selection is mainly judged by the temperature, pressure, flow rate of the medium, interference and other problems in the working condition.

When the vortex flowmeter has no liquid flow in the pipeline, the receiver counts abnormally due to the noise generated by the pipeline vibration, and the sensitivity of the instrument should be adjusted.

In the realm of water and wastewater treatment, vortex flow meters are indispensable tools for monitoring and controlling the flow of water through pipelines. Municipalities and industrial facilities rely on these meters to measure the volume of water being processed and distributed, facilitating efficient water management. Additionally, vortex flow meters are often employed in chemical processing plants to measure the flow rates of various chemicals and ensure precise dosing in manufacturing processes. Their robust design and resistance to corrosive substances make them well-suited for these demanding environments, contributing to the overall reliability and accuracy of industrial processes.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)
LUGB flange clamped vortex street steam flowmeter is a commonly used structure, its body itself does not have a connection flange, in connection with the pipe, the flowmeter clamped between two special flanges, and then bolted.

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

The method and requirements of temperature compensation will vary according to the specific application. In general, temperature compensation can be used in the following ways:

The robust and durable construction of vortex flow meters contributes to their popularity in industrial settings. With no moving parts in direct contact with the fluid, these meters offer minimal maintenance requirements and extended operational life. Moreover, advancements in technology have allowed for the development of digital vortex flow meters that offer enhanced precision and communication capabilities, facilitating integration with modern process control systems.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

5 main points of vortex flow meter selection

Precautions for installation and use of vortex flow meter

Vortex flowmeter is one of the commonly used instruments in daily production, therefore, failure will occur from time to time, the main reasons for the inaccurate flow accuracy of the vortex include: the influence of temperature on the measurement, the influence of the accumulation of the vortex generating body on the flow surface, the influence caused by the inconsistency between the distribution tube and the inner flow meter.

vortex flow meter is a specialized instrument designed for measuring the flow rate of liquids, gases, or steam in various industrial processes. It operates on the principle of the Von Kármán effect, where a bluff body (typically a shedder bar or a blunt object) is placed in the flow stream. As the fluid passes by the bluff body, vortices are formed alternately on either side, creating a pattern. The frequency of these vortices is directly proportional to the velocity of the flowing fluid, allowing the vortex flow meter to accurately determine the flow rate.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6