Steam CO2 Gas Air Vortex Flowmeter Sensor Factory Vortex Steam Flow Meter

Vortex flow meters are highly versatile instruments widely utilized in various industrial applications to measure the flow of liquids, gases, and steam. One prominent application of vortex flow meters is in the oil and gas industry, where they play a crucial role in measuring the flow rates of hydrocarbons through pipelines. These meters are particularly adept at handling the challenging conditions present in oil and gas operations, including high pressures and temperatures. By accurately measuring flow rates, vortex flow meters contribute to efficient process control and optimization, ensuring that production and transportation systems operate smoothly and cost-effectively.

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flow meters:

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

Temperature and pressure compensation integrated vortex flowmeter performance advantages:

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)
LUGB flange clamped vortex street steam flowmeter is a commonly used structure, its body itself does not have a connection flange, in connection with the pipe, the flowmeter clamped between two special flanges, and then bolted.

To play a greater role, the vortex flowmeter must be correctly selected, and the selection is mainly judged by the temperature, pressure, flow rate of the medium, interference and other problems in the working condition.

When selecting the right air flow meter product, a number of factors need to be considered to ensure that the selected product can meet the actual needs and has good performance. Here is a detailed buying guide to help you choose the best air flowmeter:

The method and requirements of temperature compensation will vary according to the specific application. In general, temperature compensation can be used in the following ways:

Vortex flowmeter is mainly used to set up a vortex generating body (resistance fluid) in the fluid, from both sides of the vortex generating body alternately to produce regular vortices, to measure the flow of fluid, vortex flowmeter is mainly used for industrial pipeline fluid flow measurement, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, the output signal may be unstable, causing this phenomenon to be excluded from the following points:

The robust and durable construction of vortex flow meters contributes to their popularity in industrial settings. With no moving parts in direct contact with the fluid, these meters offer minimal maintenance requirements and extended operational life. Moreover, advancements in technology have allowed for the development of digital vortex flow meters that offer enhanced precision and communication capabilities, facilitating integration with modern process control systems.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Vortex flow meters offer a host of advantages that make them a preferred choice in various industrial applications. One key advantage is their versatility in measuring the flow of liquids, gases, and steam. Unlike some other flow measurement technologies, vortex flow meters can handle a wide range of fluids, making them suitable for diverse industries such as oil and gas, water treatment, chemical processing, and HVAC systems.

Vortex flowmeter is a kind of flow measuring instrument widely used in the industrial field. Its superior performance and versatility make it play an important role in the measurement of liquid and gas medium. Vortex flowmeter can not only measure a variety of liquid media, but also suitable for a variety of gases, providing reliable flow data support for industrial production and process control.

When the vortex flowmeter has no liquid flow in the pipeline, the receiver counts abnormally due to the noise generated by the pipeline vibration, and the sensitivity of the instrument should be adjusted.

There are many types of flow meters for measuring nitrogen, and each type has its specific application scenarios and advantages. Here are some common nitrogen flowmeters:

Intelligent vortex flowmeters can measure air. Vortex flowmeter is a new flowmeter for flow measurement based on Karman vortex principle. It has good medium adaptability and can directly measure the volume flow of various media (including air). When measuring air, the vortex flowmeter generates regular vortices through the triangular column vortex generator set in the fluid, and the frequency of these vortices is proportional to the average velocity of the measured medium, so that the air flow can be calculated.

Vortex flowmeter is one of the commonly used instruments in daily production, therefore, failure will occur from time to time, the main reasons for the inaccurate flow accuracy of the vortex include: the influence of temperature on the measurement, the influence of the accumulation of the vortex generating body on the flow surface, the influence caused by the inconsistency between the distribution tube and the inner flow meter.

Vortex flowmeters are versatile instruments commonly used in various industries for fluid flow measurement. Here are some applications of vortex flowmeters in different industries:

In HVAC (heating, ventilation, and air conditioning) systems, vortex flow meters are utilized to measure the flow rates of air and other gases. Their ability to provide accurate readings in a wide range of temperatures and pressures ensures efficient HVAC system operation. Vortex flow meters contribute to energy savings by enabling precise control of airflow and facilitating better management of heating and cooling processes.

Across various industries, including pharmaceuticals, food and beverage, and power generation, vortex flow meters continue to find applications in processes requiring precise fluid flow measurement. Their adaptability to different fluid types, low maintenance requirements, and reliable performance make them indispensable tools for optimizing industrial processes and ensuring the accurate allocation of resources.

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. In addition to the characteristics of the aforementioned vortex flowmeter, it also has the following characteristics:

Vortex flowmeter is a new type flowmeter for measuring fluid flow in closed pipeline according to Karman vortex principle. It is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions.

The ethane Flow Meter Purchase Guide is designed to help you choose the best solution for your needs. In the purchase process, it is necessary to consider the nature, use, safety, measurement accuracy, stability, cost and other factors. Here is a detailed shopping guide:

When choosing the right ammonia flow meter for you, several factors need to be considered to ensure the accuracy of the measurement results and the reliability of the equipment. Here’s a detailed buying guide:

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. There are no moving mechanical parts, so the reliability is high, the maintenance is small, and the instrument parameters can be stable for a long time.

Precautions for installation and use of vortex flow meter

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems: