Stainless Steel 4-20mA Industrial High Pressure Digital Liquid Control Electromagnetic Flow Meter Water Magnetic Flowmeter

Electromagnetic flowmeter at work requires that the measured medium must be ground potential, generally through the pipeline or flange ground, if the process pipe connected to the sensor relative to the measured medium is insulated (plastic pipe or pipe with an insulating lining), you must choose a grounding ring or sensor with a grounding electrode, so that the measured medium in the ground potential, easy to be ignored in the actual design and installation.

Electromagnetic flowmeter is a kind of instrument to measure the flow of conductive fluid by using Faraday’s law of electromagnetic induction according to the electromotive force generated by the flow cutting magnetic field line. The common faults of electromagnetic flowmeter are: no display, inaccurate flow measurement, air traffic control alarm, system alarm, upper and lower limit alarm, etc.

One of the defining features of electromagnetic flowmeters is their exceptional precision and accuracy in measuring fluid flow rates. The utilization of Faraday’s law of electromagnetic induction ensures that the induced voltage is directly proportional to the flow rate of the conductive liquid passing through the magnetic field. This inherent accuracy makes electromagnetic flowmeters a go-to choice in applications where precise measurements are critical, such as in pharmaceutical manufacturing, chemical processing, and water treatment.

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa… Max 42Mpa)
Accuracy: +/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode: SUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium
Structure Type: Integral type, remote type, submersible type, ex-proof type
Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s
Conductivity: >5us/cm

What are the external interference problems of the electromagnetic flowmeter for domestic wastewater

The choice of water flow meter is a comprehensive consideration process, involving many aspects of factors. Here is a guide to tap water flow meter selection to help you choose the most suitable solution:

The transducer in the split electromagnetic flowmeter can form a body or separate type with the sensor, the integrated electromagnetic flowmeter is the integrated electromagnetic flowmeter, the split type becomes the split electromagnetic flowmeter, the flowmeter is a two-way measurement system, and the three integrators are installed: the forward total, the reverse total and the difference total

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

The use of electromagnetic flowmeters is very wide, and this measuring instrument is used in many industries. Electromagnetic flowmeter is different from the general flowmeter, it follows the principle of electromagnetic induction, can measure the flow of liquid in the pipeline and its velocity.

What are the requirements for the installation environment of the electromagnetic flow meter?

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

One key advantage of electromagnetic flow meters is their versatility in handling various fluid types and conditions. Since they rely on the conductivity of the fluid rather than its physical properties, these meters are suitable for a wide range of applications, from clean water to corrosive chemicals. Additionally, they exhibit minimal pressure loss, making them an energy-efficient choice for flow measurement systems.

Advantages and disadvantages of electromagnetic flowmeter

Electromagnetic flowmeters exhibit remarkable performance even in challenging environmental conditions. Their construction materials are often chosen for their corrosion resistance, enabling these devices to withstand harsh chemicals and extreme temperatures. This robustness ensures continuous and reliable operation, making electromagnetic flowmeters suitable for demanding industrial applications where other flow measurement devices might struggle to perform consistently.

Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s
Conductivity: >5us/cm
Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse

According to the principle formula of the electromagnetic flowmeter, the induced signal potential is not affected by the change of conductivity and temperature, pressure, density and viscosity when the liquid conductivity is uniform. However, in the actual measurement, due to the following reasons, the electrical conductivity will also have some impact on the measurement.

electromagnetic flowmeters are employed in HVAC (heating, ventilation, and air conditioning) systems to measure the flow of water or other fluids used for temperature control. The precision and reliability of these flowmeters ensure optimal performance of HVAC systems, leading to energy savings and improved comfort in various buildings and facilities.

Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range： Max 15m/s
Conductivity： >5us/cm
Protection Class： IP65(Standard); IP68(Optional for remote type)
Process Connection： Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal： 4-20mA/Pulse
Communication： RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply： AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)

The application of flowmeter in food processing is very extensive, mainly reflected in the following aspects:

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

Usually there is more or less a mixture in the fluid in the measurement of some occasions. In general, in the presence of a small bubbling flow of oil and gas bubbles, it is still able to work normally, but the measurement is a fusion of the volume of oil bubbles, if the proportion of oil and gas rises to have caused a projectile flow, then the electrode may be covered by gas, resulting in the circuit is disconnected, the output shake is more likely to be directly damaged.

Selecting the right electromagnetic flowmeter is crucial for accurate and reliable measurement of fluid flow in various industrial applications. One key consideration in the selection process is the type of fluid being measured. Electromagnetic flowmeters are suitable for a wide range of conductive fluids, such as water, acids, and slurries. Their performance can be affected by factors like conductivity and the presence of suspended solids, making it essential to choose a flowmeter that is compatible with the specific fluid characteristics.

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
Accuracy: +/-0.5%(Standard)     +/-0.3% or +/-0.2%(Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode: SUS316L, Hastelloy B, Hastelloy C       Titanium, Tantalum, Platinium-iridium
Structure Type: Integral type, remote type, submersible type, ex-proof type
Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s

Electromagnetic flowmeter is a widely used flow meter, in the process of use will inevitably appear some failures, then how to check the cause of the failure and eliminate it, the next Aister to teach you several simple troubleshooting methods.

According to the composition of the sensor and the converter, the electromagnetic flowmeter can be divided into two types: separation type and one type. The separation type is to set the sensor and the converter independently, and the middle is connected with a cable, so the cable length is limited by the conductivity of the measured current body. One type is the sensor and converter as a whole set, so it is related to the fluid temperature and the ambient temperature, compared with the separation type, the applicable temperature range will be limited.

Electromagnetic flow meters operate based on a fundamental principle of electromagnetic induction, providing an accurate and reliable method for measuring the flow of conductive fluids. The working principle involves Faraday’s law of electromagnetic induction. As a conductive fluid flows through a pipe, it cuts across the magnetic field generated by coils or electrodes mounted on the flow meter. According to Faraday’s law, an electromotive force (EMF) is induced in the fluid perpendicular to both the magnetic field and the flow direction. The induced EMF is directly proportional to the flow velocity of the fluid.

Electromagnetic flowmeters find versatile applications across various industries due to their precision and reliability in measuring fluid flow. One primary area of application is in water and wastewater management, where these flowmeters excel in accurately measuring the flow of water and other conductive fluids. Municipalities and water treatment plants utilize electromagnetic flowmeters to monitor water distribution networks, optimize usage, and ensure efficient wastewater processing.

Measuring Range： Max 15m/s
Conductivity： >5us/cm
Protection Class： IP65(Standard); IP68(Optional for remote type)
Process Connection： Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal： 4-20mA/Pulse
Communication： RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply： AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption： <20W Alarm： Upper Limit Alarm / Lower Limit Alarm Self-diagnosis： Empty Pipe Alarm, Exciting Alarm Explosion Proof： ATEX

Electromagnetic flow meters offer several advantages, making them a popular choice in various industrial applications. Here are some of the key advantages of electromagnetic flow meters:

In the metering industry, electromagnetic flowmeter is a basic metering tool, and its range of use is very wide. The emergence of electromagnetic flowmeters has made great contributions to many industries, and it occupies a very important position in these industries. Pay more attention when using the electromagnetic flowmeter, check it before use to see how accurate its measurement is. The calibration of electromagnetic flowmeter is mainly considered from the following aspects:

The requirements of the straight tube section of the electromagnetic flowmeter are very important to ensure the accuracy and stability of the measurement results. The following is a detailed analysis of the requirements of the straight pipe section before and after the electromagnetic flowmeter:

Due to various reasons, some large diameter flowmeters used online can not be tested off-line. It has become an urgent problem to study an online calibration method which is both scientific and effective and ADAPTS to the needs of the field. At present, there are three common methods for online calibration of electromagnetic flowmeters:

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
Accuracy: +/-0.5%(Standard), 0.3% or 0.2% (Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Output Signal: 4-20mA/Pulse

Electromagnetic flowmeters find applications in numerous industries due to their adaptability and precision. They are extensively used in water and wastewater management for monitoring water distribution, sewage treatment, and environmental compliance. In chemical and petrochemical industries, these flowmeters excel in measuring the flow of corrosive and abrasive liquids. The food and beverage sector benefits from their accuracy in ensuring consistent liquid measurements during production processes. In pharmaceutical manufacturing, electromagnetic flowmeters contribute to the precise control of liquid ingredients, while in mining and minerals processing, they help optimize the efficiency of slurry flow.

Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s
Conductivity: >5us/cm
Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse
Communication: RS485(Standard), HART(Optional),GPRS/GSM (Optional)

Now, the input impedance of the electromagnetic flowmeter converter has improved a lot, and the error is basically not caused by changes in the conductivity of the medium when the conductive liquid is conductive, but for a certain converter input impedance, the conductivity of the measured medium has a lower limit min, which cannot be lower than this lower limit.