PTFE Liner Liquid Water RS485 Electromagnetic Flow Meter Sensor Digital Magnetic Flowmeter

The scale of the water supply system itself is huge, and the environment in which it is located is complex and changeable, requiring the electromagnetic flowmeter to have strong stability and reliability, so in the actual use process, the matters needing attention should be clear.

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

electromagnetic flowmeters have emerged as indispensable tools for industries that demand accurate and reliable flow measurements. Their advanced technology, coupled with the ability to operate in diverse environments and handle various conductive liquids, positions them as a preferred choice in applications ranging from water management to chemical processing. As technology continues to evolve, electromagnetic flowmeters are likely to witness further advancements, contributing to increased efficiency and precision in liquid flow measurement across different sectors.

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa… Max 42Mpa)
Accuracy: +/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode: SUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium
Structure Type: Integral type, remote type, submersible type, ex-proof type
Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s
Conductivity: >5us/cm
Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse
Communication: RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply: AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption: <20W Alarm: Upper Limit Alarm / Lower Limit Alarm Self-diagnosis: Empty Pipe Alarm, Exciting Alarm Explosion Proof: ATEX

Now, the input impedance of the electromagnetic flowmeter converter has improved a lot, and the error is basically not caused by changes in the conductivity of the medium when the conductive liquid is conductive, but for a certain converter input impedance, the conductivity of the measured medium has a lower limit min, which cannot be lower than this lower limit.

Electromagnetic flowmeter is a kind of induction meter to measure the volume flow of conductive medium, which can be used to measure the volume flow of strong corrosive liquid such as strong acid and alkali and uniform liquid-solid two-phase suspended liquid such as mud, pulp, pulp, etc.

In the electromagnetic flowmeter installation and debugging stage there will be some failures, below, we will understand the specific causes of the failure at this stage and their elimination methods.

The selection of circulating water flowmeter is a decision process involving many aspects, which needs to consider the characteristics of circulating water, measurement requirements, environmental conditions, economic costs and the performance characteristics of the flowmeter. Here is a comprehensive analysis and recommendations for the best options:

Electromagnetic flowmeters exhibit remarkable performance even in challenging environmental conditions. Their construction materials are often chosen for their corrosion resistance, enabling these devices to withstand harsh chemicals and extreme temperatures. This robustness ensures continuous and reliable operation, making electromagnetic flowmeters suitable for demanding industrial applications where other flow measurement devices might struggle to perform consistently.

Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s
Conductivity: >5us/cm
Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse

electromagnetic flowmeters are employed in HVAC (heating, ventilation, and air conditioning) systems to measure the flow of water or other fluids used for temperature control. The precision and reliability of these flowmeters ensure optimal performance of HVAC systems, leading to energy savings and improved comfort in various buildings and facilities.

Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range： Max 15m/s
Conductivity： >5us/cm
Protection Class： IP65(Standard); IP68(Optional for remote type)
Process Connection： Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal： 4-20mA/Pulse
Communication： RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply： AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)

Electromagnetic flowmeter is a widely used flow meter, in the process of use will inevitably appear some failures, then how to check the cause of the failure and eliminate it, the next Aister to teach you several simple troubleshooting methods.

As a measuring device with simple structure, sensitive response and not affected by physical properties such as temperature and viscosity of the measured medium, electromagnetic flowmeter has been widely used in the water supply industry, and has obtained good results.

According to the principle formula of the electromagnetic flowmeter, the induced signal potential is not affected by the change of conductivity and temperature, pressure, density and viscosity when the liquid conductivity is uniform. However, in the actual measurement, due to the following reasons, the electrical conductivity will also have some impact on the measurement.

Electromagnetic flow meter, also known as a magmeter, operates on the principle of electromagnetic induction to measure the flow rate of conductive fluids, such as water or other liquids with a certain level of electrical conductivity. Here’s a basic explanation of the principle behind electromagnetic flow meters:

Intelligent electromagnetic flowmeter has a pivotal position in liquid measurement with high measurement accuracy and stable performance. It can be seen everywhere, today we mainly talk about the intelligent electromagnetic flowmeter in daily use, which parts – electrode related maintenance points:

Electromagnetic flowmeter is a kind of induction instrument to measure the volume flow of conductive medium in tubes. It has been used in many fields. It is popular for its intuitive display and convenient operation. Here is to introduce the electromagnetic flowmeter according to the use.

The transducer in the split electromagnetic flowmeter can form a body or separate type with the sensor, the integrated electromagnetic flowmeter is the integrated electromagnetic flowmeter, the split type becomes the split electromagnetic flowmeter, the flowmeter is a two-way measurement system, and the three integrators are installed: the forward total, the reverse total and the difference total

The correct selection of electromagnetic flowmeter is the prerequisite to ensure the good use of electromagnetic flowmeter. What kind of electromagnetic flowmeter should be selected should be determined according to the physical and chemical properties of the measured body medium, so that the diameter of the electromagnetic flowmeter, flow range, lining material, electrode material and output current, etc., can adapt to the nature and flow requirements of the measured body.

Sewage flowmeter can be widely used in municipal water supply, steel, petroleum, chemical, electric power, industry, water conservancy, water resources and other departments of liquid volume flow measurement, especially suitable for channels, small river flow measurement and environmental protection disposal of sewage measurement.

Electromagnetic flowmeter as a widely used precision instrument products, whether it is the purchase, installation and commissioning and use process need to spend a lot of energy, then, the use of electromagnetic flowmeter should pay attention to what problems?

The versatility of electromagnetic flowmeters is a testament to their robust performance across a wide range of conductive liquids. Whether dealing with water, acids, bases, or slurries, these flowmeters maintain their accuracy and reliability. This adaptability is particularly valuable in industries with varying fluid compositions, allowing for a single flowmeter type to be employed in diverse applications without sacrificing performance.

Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse
Communication: RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply: AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption: <20W Alarm: Upper Limit Alarm / Lower Limit Alarm Self-diagnosis: Empty Pipe Alarm, Exciting Alarm Explosion Proof: ATEX

The shell protection level of the ordinary electromagnetic flowmeter sensor is IP65 (the dustproof and anti-splash level stipulated by GB4208), and the requirements for the installation site are:

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

Size: DN15mm-DN200mm
Nominal Pressure: 1.6Mpa
Accuracy: ±0.5%(Standard)
Liner: FEP, PFA
Output Signal: 4-20mA pulse frequency relay

Usually there is more or less a mixture in the fluid in the measurement of some occasions. In general, in the presence of a small bubbling flow of oil and gas bubbles, it is still able to work normally, but the measurement is a fusion of the volume of oil bubbles, if the proportion of oil and gas rises to have caused a projectile flow, then the electrode may be covered by gas, resulting in the circuit is disconnected, the output shake is more likely to be directly damaged.

Fixed the electromagnetic flowmeter for periodic visual inspection, check the environment around the instrument, clean dirt, ensure that no water and other substances, check whether the wiring is good, check whether the electromagnetic flowmeter near the new installation of strong electromagnetic field equipment or a new wire across the instrument.

Suitability of electromagnetic flowmeters in chlor-alkali measurement chlor-alkali occupation measurement of brine and caustic soda, both of which have the same characteristics:

Selecting the right electromagnetic flowmeter involves considering various factors to ensure it meets the specific requirements of your application. Here’s a step-by-step guide to help you choose an electromagnetic flowmeter:

The application of flowmeter in food processing is very extensive, mainly reflected in the following aspects:

Electromagnetic flowmeter in the industry has achieved good results, then as the core accessories of electromagnetic flowmeter – electrode, electrode is contact with the measured medium more accessories, then the cleaning details of the electrode is a crucial point, of course, also pay attention to a certain method.

Once the installation location is determined, the next step is preparing the piping system. Ensure that the pipeline is clean and free from debris that could interfere with the operation of the flowmeter. In some cases, straight pipe runs are recommended both upstream and downstream of the flowmeter to allow for proper fluid flow development and stabilization. This helps in achieving optimal measurement accuracy.

The electromagnetic flowmeter should be installed with the flow direction aligned with the arrow on the flowmeter body. Proper orientation ensures that the magnetic field generated by the flowmeter’s coils is perpendicular to the fluid flow, allowing for accurate measurements. Additionally, it is essential to properly ground the flowmeter to minimize electrical noise and interference, ensuring the stability of the measurement signals.

The installation process involves securely mounting the flowmeter on the piping system using appropriate brackets or supports. Care should be taken to align the flowmeter properly and tighten all connections to prevent leaks. Adequate sealing measures must be implemented to prevent ingress of moisture or contaminants into the flowmeter, which could adversely affect its performance.