Points of attention and requirements for installation of vortex flowmeter

Installation environment of vortex flowmeter:

The vapor flowmeter has no moving parts, strong reliability, high precision, long life, and can measure the instantaneous flow and cumulative flow of liquid in a wide flow range.

Intelligent vortex flowmeters can measure air. Vortex flowmeter is a new flowmeter for flow measurement based on Karman vortex principle. It has good medium adaptability and can directly measure the volume flow of various media (including air). When measuring air, the vortex flowmeter generates regular vortices through the triangular column vortex generator set in the fluid, and the frequency of these vortices is proportional to the average velocity of the measured medium, so that the air flow can be calculated.

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

Reliability is a hallmark of vortex flow meters, as they exhibit robust performance in harsh operating conditions. Their simple yet sturdy design, often featuring no moving parts, results in minimal maintenance requirements and increased longevity. This reliability is particularly crucial in industries where consistent and accurate flow measurement is essential for process control and optimization.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.

Vortex flowmeter is a commonly used flow meter, the use of any instrument is inseparable from daily maintenance and maintenance, whether it is its own failure or interference by external factors, we calmly respond to the occurrence of failure.

Vortex flowmeter can be widely used in large, medium and small kinds of pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagents and compressed air, saturated and superheated steam, natural gas and various media flow measurement and can be used as a flow transmitter in automatic control system, long service life. Points of attention for vortex flowmeter installation:

The structure of the vortex flowmeter is relatively simple, only the sensor and the display instrument are composed of two parts, and the measurement accuracy and stability are also relatively stable.

Vortex flowmeters are versatile instruments commonly used in various industries for fluid flow measurement. Here are some applications of vortex flowmeters in different industries:

vortex flow meters offer a cost-effective solution for flow measurement. Their relatively simple design, coupled with low maintenance requirements, contributes to a lower total cost of ownership over the life of the instrument. This cost efficiency, combined with their accuracy and reliability, positions vortex flow meters as a favorable choice for industries seeking optimal performance without compromising on budget considerations.

When choosing the right ammonia flow meter for you, several factors need to be considered to ensure the accuracy of the measurement results and the reliability of the equipment. Here’s a detailed buying guide:

Vortex flowmeter is a new flowmeter successfully developed on the basis of Karman vortex principle. Vortex flowmeter is suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquid. How to ensure the accuracy of vortex flowmeter measurement during installation?

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

The installation of the vortex flowmeter has different provisions, used to measure different measured media, different positions, then the installation method is not the same, the attention point is different, generally speaking, the vortex flowmeter has the following specified points:

5 main points of vortex flow meter selection

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

Vortex steam flowmeter is one of the main flowmeter products, widely used in petroleum, chemical industry, metallurgy, heating and other departments. Test and measure the flow of liquid, gas and steam.

Gas flowmeter is a general term for many measurable gas flows. Today, we mainly explain the installation conditions of vortex flowmeter.

Vortex flowmeter is widely used in various industrial environments, in view of some small problems commonly encountered in the installation of vortex flowmeter, Aister gives the following points, hoping to solve the problems encountered in the installation.

The precession vortex flowmeter adopts advanced microprocessing technology, which has the advantages of strong function, wide flow range, simple operation and maintenance, convenient installation and use.

Vortex flowmeter is used by many industries for its simple structure, small maintenance, constant accuracy, easy operation and wide application range.

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flowmeters:

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

In the selection process of the vortex flow meter, in addition to the selection of a high-precision type in a comprehensive consideration of the demand, other accessories of the vortex flow meter are also very important, such as the selection of flow transmitters, the selection of compensatory pressure transmitters, and so on.

Vortex flowmeter is a velocity flowmeter, which measures the volume flow rate in the working state. If you choose the table according to the volume flow rate, the mass flow rate provided by the customer should be converted into the volume flow rate under the working state, and then determine the diameter of the selected instrument against the volume flow parameter.

Vortex flowmeter is a kind of fluid oscillating flow detection instrument based on Karman vortex principle. It is characterized by small pressure loss, wide range and high measurement accuracy. It is almost unaffected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, there may be problems such as large measurement errors, so we need to eliminate problems from the following aspects:

One of the notable advantages of vortex flow meters is their versatility, as they can be employed in a wide range of applications across different industries. They are particularly useful for measuring the flow of fluids with varying viscosities, making them suitable for applications in petrochemical, pharmaceutical, and water treatment industries. Additionally, vortex flow meters are known for their ability to handle both high and low-flow conditions with consistent accuracy, providing reliable measurements across a broad operational range.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6