Online Check High Accuracy DN100-DN1000 Propane LPG Gas Thermal Mass Flow Meter Sensor Probe Flow Meter

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

Although the thermal gas mass flowmeter has many advantages in this respect, it can not be used for large pipe runoff measurement, pressure loss is relatively large, and the price is more expensive, which limits its measurement application in natural gas long distance pipeline.

In order to solve the problem of leakage caused by poor measurement accuracy or inability to measure below the lower limit of the instrument, a new type of thermal gas mass flowmeter is developed based on the theory of forced convection heat transfer and the principle of hot wire anemometer. The sensitivity of the instrument is greatly improved and the dead zone of the instrument is reduced by using microfilament structure in the sensitive element and the velocity measuring heating element.

The origin of the thermal gas mass flowmeter is from the hot wire anemometer. The temperature of the platinum heating wire has a proportional relationship with the change in the flow rate of the fluid: the faster the flow rate, the more heat is taken away.

Thermal gas mass flowmeter adopts the principle of thermal diffusion, and thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions.

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

The reason why the thermal gas mass flowmeter is so popular is mainly due to its many advantages and wide application scenarios. Here’s a breakdown of why it’s popular:

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

The thermal gas flowmeter has many remarkable characteristics, which make it widely used in the field of gas flow measurement. The following are the main features of thermal gas flowmeters:

Thermal mass flowmeters are widely used in various industries due to their ability to measure the flow rate of gases accurately. Here are some applications of thermal mass flowmeters across different industries:

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure fluid flow. The instrument uses the constant temperature difference method to measure the gas flow accurately. It has the advantages of small size, high digitization, easy installation and accurate measurement.

1. Principle of thermal gas mass flowmeter

Thermal gas mass flowmeter The thermal distributed flowmeter uses the flow fluid to transfer heat to change the heat conduction distribution effect of measuring the temperature distribution of the tube wall. 2) King’s Law using the heat dissipation (cooling) effect. And because the structure of the detection element extends into the measuring tube, also known as immersion or intrusion type. Some instruments that are inserted from outside the tube into the process tube when in use are called plug-in.

Due to the continuous development of thermal gas mass flow meter is based on the principle of thermal diffusion, that is, the use of fluid flow through the heated object, the heated object of the heat dissipation of how much with the fluid flow rate into a certain proportional relationship. Specifically, the flow meter’s sensor has two standard and the RTD, has been used as a heat source, has been used to measure the fluid temperature, the fluid flows through, the heat loss of the heat source and the size of the flow into a non-linear relationship, the thermal gas mass flowmeter can be converted into a measurement of this relationship to measure the flow rate of the signal of the linear output.

Thermal gas mass flowmeter has a wide range of applications in many fields, its high precision, rapid response and stability characteristics make it in a variety of gas flow measurement occasions can play an excellent performance, for the development of various industries to provide more reliable technical support.

At present, oxygen generator in the production process will be affected by external influences, more and more enterprises for fine management, energy consumption, cost accounting and other requirements for the loss of this part of the oxygen measurement.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

The thermal mass flowmeter is an device for measuring gas flow by using the principle of thermal diffusion. The sensor consists of two reference thermal resistors (RTDS). One is the speed sensor RH, and the other is the temperature sensor RMG, which measures the temperature change of the gas. When the two RTDS are placed in the measured gas, one sensor RH is heated and the other sensor RMG is used to sense the measured gas temperature. As the gas flow rate increases, the airflow carries away more heat, and the temperature of the sensor RH drops.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow. The most important thing is that the range ratio of this flowmeter is very wide, which greatly meets the measurement needs of the owner.

The thermal gas flowmeter adopts the principle of thermal diffusion, and the thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions. Typical sensing elements of thermal gas mass flowmeters include two thermal resistors (PT100), one is a speed sensor and one is a temperature sensor that automatically compensates for changes in gas temperature.

When applying a thermal mass flowmeter, several key points need to be considered to ensure accurate and reliable measurement. Here are some important factors to pay attention to:

In-line thermal mass flowmeter is equipped with the same process pipe with the same inner diameter as the field pipe. The connection with the field pipe is flange connection or thread connection. Pipe segment sensor applicable pipe diameter: DN15 ~ 2000mm.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

Thermal gas mass flowmeter has certain operating procedures and precautions in use, and must pay attention to these points when in use:

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The correct use of gas flowmeters is the key to ensure accurate and reliable measurement results. The following is the correct use of gas flowmeters:

Direct measurement of gas mass, without temperature, pressure compensation of gas flow measurement instrument, it represents the development trend of gas flow measurement. The thermal mass flowmeter sensor part is composed of two reference platinum resistance temperature sensors, using a bridge loop, one sensor measures the fluid temperature, and the other sensor is a heating element, maintaining a constant temperature difference higher than the fluid temperature, that is, when the gas flows through the heating element, the heat is taken away, and the heat is proportional to the flow rate of the gas and the density of the gas. To maintain a fixed temperature difference between the two temperature sensors requires the circuit to provide more power to the heating element, and the amount of output power in the circuit is related to the mass of the fluid, thus measuring the flow rate.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

Common faults encountered with thermal mass flowmeters can disrupt their accurate measurement capabilities. Here are some typical issues along with potential solutions:

Like the flue gas, this medium has a higher temperature, contains more impurities such as solid dust, the general application of large caliber, flow rate range is relatively wide, so the measurement is more difficult, so in the selection and use of flue gas flow timing should pay attention to the characteristics of the power plant flue wind speed, pay attention to the principle of choosing sensors, It is also necessary to pay attention to the wear resistance, corrosion resistance, dirt resistance and high temperature resistance of the sensor, and select the appropriate measurement position to ensure the measurement accuracy.

The data show that in the flow measurement failure probability, the improper selection of flowmeter accounts for about 70%, and the quality of flowmeter products or other reasons account for 30%, which shows how important the selection of flow measurement is.

Thermal gas mass flowmeter due to its various advantages and characteristics, now has been widely used in various industries flow measurement, in the actual measurement of thermal gas flow meter technical advantages are more and more obvious, the following we on the thermal gas mass flowmeter application occasions and some of their own technical advantages do some introduction, hope to be useful to you: