Liquid Water Sanitary Milk Beer Base Oil Olive Tri-Clamp Turbine Flow Meter

In the oil and gas sector, liquid turbine flowmeters are employed for measuring the flow of hydrocarbons in pipelines. Their robust construction and ability to withstand harsh conditions make them well-suited for applications in oil refineries, where accurate flow measurements are crucial for optimizing production processes and ensuring compliance with industry standards.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Liquid turbine flow meters are devices used to measure the flow of liquids through a pipeline. They operate on the principle of a turbine rotor turning in response to fluid flow. Here are some advantages of liquid turbine flow meters:

Turbine flowmeter is a kind of speed instrument, which has the advantages of high precision, good repeatability, simple structure, high pressure resistance, wide measuring range, small size, light weight, small pressure loss, long life, simple operation, easy maintenance, etc., used to measure the volume flow and accumulation of low viscosity, no strong corrosion and clean liquid in closed pipelines. It can be widely used in petroleum, chemical industry, metallurgy, organic liquid, inorganic liquid, liquefied gas, urban gas pipe network, pharmaceutical, food, paper and other industries.

The threaded liquid turbine flowmeter is a kind of precision flow measuring instrument, which can be used to measure the flow and total amount of liquid with the corresponding flow integrating instrument. Widely used in petroleum, chemical industry, metallurgy, scientific research and other fields of measurement, control system. Threaded liquid turbine flowmeter sensors with sanitary fittings can be used in the pharmaceutical industry.

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

In the case that the type of flow sensor has been selected, the selection of the flow sensor specification and its supporting components is very important. In a word, choose well to use well. Therefore, two basic principles should be grasped in the selection process of turbine flowmeter; To wit:

Nominal diameter: DN15-DN200mm
Accuracy level: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Nominal diameter: DN4-DN200mm
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Liquid turbine flowmeters also find application in the pharmaceutical industry, where precise measurements of liquid flow rates are vital for the production of pharmaceutical products. From monitoring the flow of ingredients during manufacturing to ensuring accurate dosing in pharmaceutical research and development, these flowmeters contribute to the quality and consistency of pharmaceutical processes.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Nominal diameter: DN4-DN200mm
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Size: DN4,6,10,15,20,32,40,50,65,80
Accuracy: ±0.5% (±0.2% Optional)
Sensor Material: SS304 (SS316L Optional)
Signal Output: Pulse, 4-20mA
Digital Communication: MODBUS RS485, HART

Liquid turbine flowmeters offer several advantages that make them a popular choice for measuring the flow of liquids in various industrial applications. One significant advantage is their high accuracy in providing precise measurements of liquid flow rates. These flowmeters are capable of delivering reliable data, making them essential for industries where accurate monitoring and control of fluid processes are critical for operational success.

Connection mode: Thread, clamp, flange, clamp type
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material: 304, 316 stainless steel, etc
Use conditions: Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function: Pulse signal, 4-20mA signal
Communication output function: RS485 communication, HART protocol, etc

Nominal diameter: DN4-DN200mm
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Nominal diameter: DN4-DN200mm
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Liquid turbine flowmeters find widespread applications across various industries due to their versatility, accuracy, and reliability in measuring liquid flow rates. One prominent application is in the field of water management, where these flowmeters are utilized to measure the flow of water in distribution systems, wastewater treatment plants, and irrigation networks. The accurate and real-time data provided by liquid turbine flowmeters contribute to efficient water resource management and conservation efforts.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Liquid turbine flowmeter mainly uses advanced single-chip microcomputer technology, is a new type of flow meter and traditional turbine flow sensor and secondary meter measurement system, compared with its smaller volume, and intuitive reading display, turbine flowmeter in the measurement, will not be affected by external power supply, and has a good anti-lightning meter low cost advantage.

the characteristics of liquid turbine flowmeters include high accuracy, wide rangeability, compact design, durability, and quick response times. These qualities collectively contribute to their effectiveness and reliability in measuring liquid flow rates across diverse industrial applications.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

liquid turbine flowmeters are utilized in HVAC (heating, ventilation, and air conditioning) systems to measure the flow of liquids such as water or refrigerants. In this context, they contribute to the efficiency of temperature control systems by providing accurate flow data, enabling precise adjustments and optimal energy utilization in commercial and residential buildings.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Another notable characteristic of liquid turbine flowmeters is their wide rangeability. These flowmeters can effectively measure a broad spectrum of flow rates, from low to high, while maintaining consistent accuracy. This versatility is crucial in industries where liquid flow rates can vary significantly, allowing for the measurement of different flow conditions without sacrificing measurement precision.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

A liquid turbine flow meter is a type of flow meter designed to measure the flow rate of liquid substances, such as water, chemicals, or petroleum-based fluids. It operates on the principle of a turbine inserted into the flow stream. As the liquid flows through the meter, it causes the turbine to rotate. The rotational speed of the turbine is directly proportional to the velocity of the liquid, allowing for accurate measurement of the flow rate.

Nominal diameter: DN15-DN200mm
Accuracy level: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Liquid turbine flow meters are devices used to measure the flow of liquids through a pipeline. They operate on the principle of a turbine rotor turning in response to fluid flow. Here are some advantages of liquid turbine flow meters:

the versatile applications of liquid turbine flowmeters span industries such as water management, chemical manufacturing, pharmaceuticals, oil and gas, and HVAC systems. Their ability to deliver accurate and real-time liquid flow measurements makes them indispensable for enhancing efficiency, safety, and precision in a wide range of industrial processes.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Turbine flowmeter has the characteristics of simple structure, light weight, high precision, good repeatability, sensitive response, easy installation and maintenance, etc., widely used in petroleum, chemical industry, metallurgy, water supply, paper and other industries.

Liquid turbine flowmeter mainly uses advanced single-chip microcomputer technology, is a new type of flow meter and traditional turbine flow sensor and secondary meter measurement system, compared with its smaller volume, and intuitive reading display, turbine flowmeter in the measurement, will not be affected by external power supply, and has a good anti-lightning meter low cost advantage.

Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%;
OUTPUT: PULSE+4-20mA;
Digital Communication:RS485, MODBUS; HART
LCD display

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

liquid turbine flowmeters are known for their quick response times. The turbine mechanism enables rapid detection and adaptation to changes in liquid flow rates, providing real-time data for process monitoring and control. This characteristic is particularly valuable in industries where timely adjustments are crucial for maintaining operational efficiency.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid