IP65 Intelligent Vortex Flowmeter Gas Vapor Liquid Natural Gas Wastewater High Precision Sensor

5 main points of vortex flow meter selection

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems:

In HVAC (heating, ventilation, and air conditioning) systems, vortex flow meters are utilized to measure the flow rates of air and other gases. Their ability to provide accurate readings in a wide range of temperatures and pressures ensures efficient HVAC system operation. Vortex flow meters contribute to energy savings by enabling precise control of airflow and facilitating better management of heating and cooling processes.

Across various industries, including pharmaceuticals, food and beverage, and power generation, vortex flow meters continue to find applications in processes requiring precise fluid flow measurement. Their adaptability to different fluid types, low maintenance requirements, and reliable performance make them indispensable tools for optimizing industrial processes and ensuring the accurate allocation of resources.

Measured Medium: Liquid, Gas, Steam
Medium Temp: -40℃~+200℃; -40℃~+280℃; 40℃~+350℃
Nominal Pressure: 1.6MPa;2.5MPa;4.0MPa;6.4MPa(Other pressure can be custom,need consult supplier)
Accuracy: 1.0%(Flange), 1.5%(Insertion)
Material: SS304(Standard), SS316(Optional)

Vortex steam flowmeter is one of the main flowmeter products, widely used in petroleum, chemical industry, metallurgy, heating and other departments. Test and measure the flow of liquid, gas and steam.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)

The method and requirements of temperature compensation will vary according to the specific application. In general, temperature compensation can be used in the following ways:

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)
LUGB flange clamped vortex street steam flowmeter is a commonly used structure, its body itself does not have a connection flange, in connection with the pipe, the flowmeter clamped between two special flanges, and then bolted.

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

Vortex flowmeter is based on the Karman vortex street principle, which is mainly performed by setting a non-streamlined vortex generator (resistance fluid) in the flowing fluid, and alternately producing two columns of regular vortices from both sides of the vortex generator.

Vortex flowmeter is a new type flowmeter for measuring fluid flow in closed pipeline according to Karman vortex principle. It is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions.

vortex flow meters offer a cost-effective solution for flow measurement. Their relatively simple design, coupled with low maintenance requirements, contributes to a lower total cost of ownership over the life of the instrument. This cost efficiency, combined with their accuracy and reliability, positions vortex flow meters as a favorable choice for industries seeking optimal performance without compromising on budget considerations.

Vortex flowmeter is a kind of fluid oscillating flow detection instrument based on Karman vortex principle. It is characterized by small pressure loss, wide range and high measurement accuracy. It is almost unaffected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, there may be problems such as large measurement errors, so we need to eliminate problems from the following aspects:

In the realm of water and wastewater treatment, vortex flow meters are indispensable tools for monitoring and controlling the flow of water through pipelines. Municipalities and industrial facilities rely on these meters to measure the volume of water being processed and distributed, facilitating efficient water management. Additionally, vortex flow meters are often employed in chemical processing plants to measure the flow rates of various chemicals and ensure precise dosing in manufacturing processes. Their robust design and resistance to corrosive substances make them well-suited for these demanding environments, contributing to the overall reliability and accuracy of industrial processes.

When selecting the right air flow meter product, a number of factors need to be considered to ensure that the selected product can meet the actual needs and has good performance. Here is a detailed buying guide to help you choose the best air flowmeter:

There are many types of flow meters for measuring nitrogen, and each type has its specific application scenarios and advantages. Here are some common nitrogen flowmeters:

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

Temperature and pressure compensation integrated vortex flowmeter performance advantages:

Vortex flowmeter is one of the commonly used instruments in daily production, therefore, failure will occur from time to time, the main reasons for the inaccurate flow accuracy of the vortex include: the influence of temperature on the measurement, the influence of the accumulation of the vortex generating body on the flow surface, the influence caused by the inconsistency between the distribution tube and the inner flow meter.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. There are no moving mechanical parts, so the reliability is high, the maintenance is small, and the instrument parameters can be stable for a long time.

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flow meters:

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

The water and wastewater treatment sector also benefits significantly from vortex flow meters. These meters are used to measure the flow of water in pipes, helping to monitor consumption, detect leaks, and optimize water treatment processes. Their robust construction and suitability for both clean and dirty water make vortex flow meters essential tools for managing water resources effectively.

The robust and durable construction of vortex flow meters contributes to their popularity in industrial settings. With no moving parts in direct contact with the fluid, these meters offer minimal maintenance requirements and extended operational life. Moreover, advancements in technology have allowed for the development of digital vortex flow meters that offer enhanced precision and communication capabilities, facilitating integration with modern process control systems.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

The ethane Flow Meter Purchase Guide is designed to help you choose the best solution for your needs. In the purchase process, it is necessary to consider the nature, use, safety, measurement accuracy, stability, cost and other factors. Here is a detailed shopping guide:

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

Vortex flowmeter is a kind of flow measuring instrument widely used in the industrial field. Its superior performance and versatility make it play an important role in the measurement of liquid and gas medium. Vortex flowmeter can not only measure a variety of liquid media, but also suitable for a variety of gases, providing reliable flow data support for industrial production and process control.

One of the notable advantages of vortex flow meters is their versatility, as they can be employed in a wide range of applications across different industries. They are particularly useful for measuring the flow of fluids with varying viscosities, making them suitable for applications in petrochemical, pharmaceutical, and water treatment industries. Additionally, vortex flow meters are known for their ability to handle both high and low-flow conditions with consistent accuracy, providing reliable measurements across a broad operational range.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.