Installation requirements for vortex flowmeters

To play a greater role, the vortex flowmeter must be correctly selected, and the selection is mainly judged by the temperature, pressure, flow rate of the medium, interference and other problems in the working condition.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)
LUGB flange clamped vortex street steam flowmeter is a commonly used structure, its body itself does not have a connection flange, in connection with the pipe, the flowmeter clamped between two special flanges, and then bolted.

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

As a very special medium, steam will show special phenomena and problems in the process of vortex flowmeter measurement. The key problem is that the vapor density value deviates too much from the design value, which brings significant measurement errors to the measurement results. At present, the mature density measuring instrument has not been successfully applied, which brings certain difficulties to the steam flow measurement.

At present, many users often think that the purchase of a high-price flow meter can get accurate measurement results. The measurement of steam is different from other fluids such as water, air and other media, and there are many factors affecting its measurement in the actual measurement.

1, pulse vortex flowmeter is a kind of high measurement accuracy, simple installation, small maintenance, a wide range of meters, is currently widely used in petrochemical, metallurgy, textile, urban construction, energy and other industries.

1, pulse vortex flowmeter is a kind of high measurement accuracy, simple installation, small maintenance, a wide range of meters, is currently widely used in petrochemical, metallurgy, textile, urban construction, energy and other industries.

Compressed air is generated by air compressor or high pressure fan. When these devices are in operation, they all have varying degrees of vibration, and sometimes the vibration is relatively strong, and this vibration is transmitted through the connecting pipe.

Intelligent vortex flowmeters can measure air. Vortex flowmeter is a new flowmeter for flow measurement based on Karman vortex principle. It has good medium adaptability and can directly measure the volume flow of various media (including air). When measuring air, the vortex flowmeter generates regular vortices through the triangular column vortex generator set in the fluid, and the frequency of these vortices is proportional to the average velocity of the measured medium, so that the air flow can be calculated.

vortex flow meters offer a cost-effective solution for flow measurement. Their relatively simple design, coupled with low maintenance requirements, contributes to a lower total cost of ownership over the life of the instrument. This cost efficiency, combined with their accuracy and reliability, positions vortex flow meters as a favorable choice for industries seeking optimal performance without compromising on budget considerations.

Another notable application of vortex flow meters is in the field of HVAC (Heating, Ventilation, and Air Conditioning) systems. These meters accurately measure the flow of chilled water or air, providing essential data for optimizing system performance and energy efficiency. By monitoring flow rates in HVAC systems, vortex flow meters help maintain ideal conditions in buildings, ensuring proper temperature control and minimizing energy consumption. In summary, vortex flow meters find widespread application across diverse industries, offering a reliable and cost-effective solution for measuring fluid flow in a variety of challenging environments.

At present, there are many misunderstandings about steam measurement in China, and many users often think that buying a high-price flowmeter can get accurate measurement results. The measurement of steam is different from other fluids such as water, air and other media, and there are many factors affecting its measurement in the actual measurement. Therefore, there is often a phenomenon that the flow meter itself is qualified, but the actual measurement is not “allowed”. So what’s the problem with these factors?

The working principle of vortex flowmeter is to place a non-streamlined vortex generator in the fluid, so that the fluid is alternately separated on both sides of the generator, releasing two series of regularly staggered vortex flowmeter. In a certain range, the vortex separation frequency is proportional to the flow rate, and the vortex flowmeter can measure the flow rate of the medium by calculating the vortex separation frequency.

Vortex flow meters offer a host of advantages that make them a preferred choice in various industrial applications. One key advantage is their versatility in measuring the flow of liquids, gases, and steam. Unlike some other flow measurement technologies, vortex flow meters can handle a wide range of fluids, making them suitable for diverse industries such as oil and gas, water treatment, chemical processing, and HVAC systems.

The robust and durable construction of vortex flow meters contributes to their popularity in industrial settings. With no moving parts in direct contact with the fluid, these meters offer minimal maintenance requirements and extended operational life. Moreover, advancements in technology have allowed for the development of digital vortex flow meters that offer enhanced precision and communication capabilities, facilitating integration with modern process control systems.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Vortex flowmeter is mainly used to set up a vortex generating body (resistance fluid) in the fluid, from both sides of the vortex generating body alternately to produce regular vortices, to measure the flow of fluid, vortex flowmeter is mainly used for industrial pipeline fluid flow measurement, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, the output signal may be unstable, causing this phenomenon to be excluded from the following points:

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

The insertion vortex flowmeter is mainly used for the flow measurement of large-diameter gas, liquid and steam medium in industrial pipelines. In order to ensure the accuracy of its measurement, the following points should be noted when installing:

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. There are no moving mechanical parts, so the reliability is high, the maintenance is small, and the instrument parameters can be stable for a long time.

Temperature and pressure compensation integrated vortex flowmeter performance advantages:

In the process of diameter selection of vortex flowmeter, special attention should be paid to the fact that the diameter of vortex flowmeter cannot be selected according to the original pipe diameter on site. The diameter of the vortex flowmeter should be determined according to the parameters in the pipeline such as the flow range of the medium in the pipeline, working temperature and working pressure, and then combined with the technical parameters of the vortex flowmeter.

Vortex flowmeters are not only suitable for measuring a variety of low viscosity liquids, but also mainly for industrial measurement of gases and vapors. When measuring the volume flow of gas, vortex flowmeters are not affected by changes in fluid temperature, pressure, density, viscosity and other properties, so the measurement is very accurate and is the first choice for measuring air.

There are many types of flow meters for measuring nitrogen, and each type has its specific application scenarios and advantages. Here are some common nitrogen flowmeters:

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

Vortex flowmeter has high requirements for installation and working environment, and the front and rear straight pipe sections must be installed in accordance with the specifications.

There are often some error factors in the calibration and use of flowmeter coefficient, which affect the accuracy of gas metering. The following are the factors that affect the accuracy of the steam flowmeter.

In HVAC (heating, ventilation, and air conditioning) systems, vortex flow meters are utilized to measure the flow rates of air and other gases. Their ability to provide accurate readings in a wide range of temperatures and pressures ensures efficient HVAC system operation. Vortex flow meters contribute to energy savings by enabling precise control of airflow and facilitating better management of heating and cooling processes.

Across various industries, including pharmaceuticals, food and beverage, and power generation, vortex flow meters continue to find applications in processes requiring precise fluid flow measurement. Their adaptability to different fluid types, low maintenance requirements, and reliable performance make them indispensable tools for optimizing industrial processes and ensuring the accurate allocation of resources.

Reliability is a hallmark of vortex flow meters, as they exhibit robust performance in harsh operating conditions. Their simple yet sturdy design, often featuring no moving parts, results in minimal maintenance requirements and increased longevity. This reliability is particularly crucial in industries where consistent and accurate flow measurement is essential for process control and optimization.

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.

The vortex flowmeter has a flow meter in the pipeline without output. The reasons for this failure and the corresponding solutions are as follows: