Good Quality Large Diameter Insert Thermal Gas Mass Flowmeter/LPG Flow Meter

Thermal gas mass flowmeter due to its various advantages and characteristics, now has been widely used in various industries flow measurement, in the actual measurement of thermal gas flow meter technical advantages are more and more obvious, the following we on the thermal gas mass flowmeter application occasions and some of their own technical advantages do some introduction, hope to be useful to you:

The thermal mass flowmeter is an device for measuring gas flow by using the principle of thermal diffusion. The sensor consists of two reference thermal resistors (RTDS). One is the speed sensor RH, and the other is the temperature sensor RMG, which measures the temperature change of the gas. When the two RTDS are placed in the measured gas, one sensor RH is heated and the other sensor RMG is used to sense the measured gas temperature. As the gas flow rate increases, the airflow carries away more heat, and the temperature of the sensor RH drops.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

Thermal gas mass flow meter is used to measure and control the gas mass flow meter, different from other gas flow meters, do not need to carry out pressure and temperature correction, directly measure the gas mass flow.

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

With the development of new energy technology, natural gas is more and more widely used in many new energy industries, and the thermal gas mass flowmeter has become a suitable instrument for measuring high pressure gas measurement. Below we analyze from the perspective of product performance and installation cost, why the thermal gas mass flowmeter can become a suitable low degree meter in high pressure natural gas measurement.

Thermal gas mass flowmeter has a wide range of applications in many fields, its high precision, rapid response and stability characteristics make it in a variety of gas flow measurement occasions can play an excellent performance, for the development of various industries to provide more reliable technical support.

Although the thermal gas mass flowmeter has many advantages in this respect, it can not be used for large pipe runoff measurement, pressure loss is relatively large, and the price is more expensive, which limits its measurement application in natural gas long distance pipeline.

Thermal gas mass flowmeter can be used to measure any gas that does not contain condensed liquid in various shapes and materials (such as round pipe, square pipe, rectangular pipe, etc., diameter from 8mm-10000mm or larger, all kinds of metal, plastic, cement material), it does not need temperature and pressure compensation, directly measure the mass flow of fluid.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The thermal gas flowmeter has many remarkable characteristics, which make it widely used in the field of gas flow measurement. The following are the main features of thermal gas flowmeters:

In-line thermal mass flowmeter is equipped with the same process pipe with the same inner diameter as the field pipe. The connection with the field pipe is flange connection or thread connection. Pipe segment sensor applicable pipe diameter: DN15 ~ 2000mm.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument adopts constant temperature difference method for gas mass flow sensor part consists of two reference platinum resistance temperature sensors. Using a bridge loop, one sensor measures the flow temperature and the other maintains a constant temperature difference above the fluid temperature, allowing flow measurement under high temperature and high pressure conditions.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

Thermal gas mass flowmeter adopts the principle of thermal diffusion, and thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions.

Like the flue gas, this medium has a higher temperature, contains more impurities such as solid dust, the general application of large caliber, flow rate range is relatively wide, so the measurement is more difficult, so in the selection and use of flue gas flow timing should pay attention to the characteristics of the power plant flue wind speed, pay attention to the principle of choosing sensors, It is also necessary to pay attention to the wear resistance, corrosion resistance, dirt resistance and high temperature resistance of the sensor, and select the appropriate measurement position to ensure the measurement accuracy.

1. Principle of thermal gas mass flowmeter

Thermal gas mass flowmeter The thermal distributed flowmeter uses the flow fluid to transfer heat to change the heat conduction distribution effect of measuring the temperature distribution of the tube wall. 2) King’s Law using the heat dissipation (cooling) effect. And because the structure of the detection element extends into the measuring tube, also known as immersion or intrusion type. Some instruments that are inserted from outside the tube into the process tube when in use are called plug-in.

Thermal gas mass flowmeter as a gas flowmeter, the application is very wide, today we specifically understand the use of thermal gas mass flowmeter:

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Choosing the correct installation direction for a thermal gas mass flowmeter is essential for optimal performance and accurate measurement. The installation direction should be determined based on factors such as the flow profile, flow conditions, and manufacturer recommendations. Here are some guidelines to help you choose the appropriate installation direction for a thermal gas mass flowmeter:

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

The medium of one of the two tubes of the thermal gas mass flowmeter does not flow, and the medium of the other tube flows. By comparing the Coriolis force of two pipes to obtain the flow rate, it is convenient to eliminate the natural vibration of the pipeline, the vibration of the fluid itself and other factors that affect or interfere with the measurement.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

The thermal mass flowmeter is a flow meter based on the principle of thermal diffusion. The device uses the constant temperature difference method to measure the gas accurately. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

In practical applications, thermal mass flowmeters require careful attention to various factors to ensure accurate and reliable measurement of fluid flow rates. Here are some key considerations for the practical application of thermal mass flowmeters:

Thermal gas mass flowmeters are a type of mass flowmeter specifically designed for measuring the flow rate of gases, while mass flowmeters, in a broader sense, can measure the flow rate of both gases and liquids. Here are some key differences between thermal gas mass flowmeters and other types of mass flowmeters:

At the heart of a thermal mass flow meter is a sensor that heats up a portion of the gas stream while monitoring the temperature difference between the heated and unheated sections. As the gas flows over the heated sensor, it carries away heat, and the temperature difference provides a direct measurement of the mass flow rate. The beauty of this method lies in its ability to provide accurate readings across a wide range of flow rates, from low to high velocities, ensuring versatility and reliability in various industrial settings.

Structural form: plug-in pipelined
Measuring medium: All gases (except acetylene)
Pipe diameter range: Caliber DN32 or higher DN10～DN2000mm
Velocity range: 0.1～120Nm/s
Precision: ±1～2.5%
Operating temperature: Sensor：-40℃～+220℃
convertor：-20℃～+45℃
Working pressure: Medium pressure≤2.5Mpa
Medium pressure≤4.0Mpa
Power supply: DC24V or AC220V≤18W

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure fluid flow. The instrument uses the constant temperature difference method to measure the gas flow accurately. It has the advantages of small size, high digitization, easy installation and accurate measurement.

The correct use of gas flowmeters is the key to ensure accurate and reliable measurement results. The following is the correct use of gas flowmeters: