Electromagnetic Flow Meter

Sewage flowmeter can be widely used in municipal water supply, steel, petroleum, chemical, electric power, industry, water conservancy, water resources and other departments of liquid volume flow measurement, especially suitable for channels, small river flow measurement and environmental protection disposal of sewage measurement.

Electromagnetic flowmeter is based on the principle of electromagnetic induction, through the electromotive force generated by the conductive fluid through the external magnetic field to measure the fluid flow meter. Electromagnetic flowmeter is widely used because of its high precision and good stability, so the choice of integrated or split electromagnetic flowmeter is particularly important.

According to the composition of the sensor and the converter, the electromagnetic flowmeter can be divided into two types: separation type and one type. The separation type is to set the sensor and the converter independently, and the middle is connected with a cable, so the cable length is limited by the conductivity of the measured current body. One type is the sensor and converter as a whole set, so it is related to the fluid temperature and the ambient temperature, compared with the separation type, the applicable temperature range will be limited.

The grounding of the electromagnetic flowmeter is equipped with a grounding ring, and then the grounding ring is connected to the pipeline. If it’s lined, you need a third electrode to ground it.

Electromagnetic flowmeter as a widely used precision instrument products, whether it is the purchase, installation and commissioning and use process need to spend a lot of energy, then, the use of electromagnetic flowmeter should pay attention to what problems?

In the electromagnetic flowmeter installation and debugging stage there will be some failures, below, we will understand the specific causes of the failure at this stage and their elimination methods.

The plug-in electromagnetic flowmeter has a wide range of applications, and can be used to measure the volume flow of conductive liquid and slurry in closed pipelines in many fields such as petroleum, chemical industry, metallurgy, paper making, environmental protection, municipal management, water conservancy construction and so on.

The correct selection of electromagnetic flowmeter is the prerequisite to ensure the good use of electromagnetic flowmeter. What kind of electromagnetic flowmeter should be selected should be determined according to the physical and chemical properties of the measured body medium, so that the diameter of the electromagnetic flowmeter, flow range, lining material, electrode material and output current, etc., can adapt to the nature and flow requirements of the measured body.

Electromagnetic flowmeter as a commonly used flow measurement instrument, the choice of its material is also an important factor. Because in the electromagnetic flowmeter, the part in contact with the medium is only the electrode and the inside of the measuring tube, it is necessary to select the correct electrode and lining material according to the characteristics of different media.

Electromagnetic flowmeter is a kind of high precision, high reliability and long service life flow surface, which is composed of two parts: the sensor that directly contacts the pipeline medium and the upper end signal converter.

Electromagnetic flowmeter is a kind of induction instrument to measure the volume flow of conductive medium in tubes. It has been used in many fields. It is popular for its intuitive display and convenient operation. Here is to introduce the electromagnetic flowmeter according to the use.

The electrode is the main part of the electromagnetic flowmeter used to measure the liquid flow, therefore, the choice of normal electrode material is directly related to the accuracy of the measurement and the price of the electromagnetic flowmeter.

Electromagnetic flowmeter in the use of precautions and installation requirements

The correct selection of electromagnetic flowmeter is the prerequisite to ensure that the electromagnetic flowmeter can be used well. The choice of electromagnetic flowmeter needs to be determined according to the physical and chemical properties of the tested conductive liquid medium.

The shell protection level of the ordinary electromagnetic flowmeter sensor is IP65 (the dustproof and anti-splash level stipulated by GB4208), and the requirements for the installation site are:

The correct selection of electromagnetic flowmeter is the prerequisite to ensure the normal use of the instrument. The diameter, flow range, lining material, electrode material and output current of the electromagnetic flowmeter should be determined according to the physical and chemical properties of the measured flow medium, and can adapt to the field environment and meet the technical indicators and performance requirements.

Electromagnetic flowmeter is composed of two parts: sensor and converter. It is based on Faraday’s law of electromagnetic induction, used to measure the volume flow of conductive liquid with an electrical conductivity greater than 5μS/cm, is a kind of induction instrument to measure the volume flow of conductive medium.

The role of electromagnetic flow meter grounding in actual installation. Compared with other flowmeter products, electromagnetic flowmeter has high precision, reliable performance, stable work and excellent anti-interference ability. However, as a precision instrument, in order to meet these high requirements, it is necessary to have strict installation requirements, this article will introduce the electromagnetic flowmeter grounding wire that is often not paid attention to when installing.

What are the requirements for the installation environment of the electromagnetic flow meter?

Electromagnetic flowmeters are classified according to the assembly method of converters and sensors, with split type and one type. Split type electromagnetic flowmeter is relative to the integrated, its components are: measuring tube, electrode, excitation coil, iron core and yoke housing. Used to measure the volume flow of conductive liquid and slurry in closed pipes.

The transducer in the split electromagnetic flowmeter can form a body or separate type with the sensor, the integrated electromagnetic flowmeter is the integrated electromagnetic flowmeter, the split type becomes the split electromagnetic flowmeter, the flowmeter is a two-way measurement system, and the three integrators are installed: the forward total, the reverse total and the difference total

For the daily inspection of the electromagnetic flow meter, in addition to the inspection of the sensor we talked about last time, it is also necessary to check the sensor of the electromagnetic flow meter, connecting cables, etc., below we will understand how to operate.

According to the principle formula of the electromagnetic flowmeter, the induced signal potential is not affected by the change of conductivity and temperature, pressure, density and viscosity when the liquid conductivity is uniform. However, in the actual measurement, due to the following reasons, the electrical conductivity will also have some impact on the measurement.

Now, the input impedance of the electromagnetic flowmeter converter has improved a lot, and the error is basically not caused by changes in the conductivity of the medium when the conductive liquid is conductive, but for a certain converter input impedance, the conductivity of the measured medium has a lower limit min, which cannot be lower than this lower limit.

Electromagnetic flowmeter is a kind of induction meter to measure the volume flow of conductive medium, which can be used to measure the volume flow of strong corrosive liquid such as strong acid and alkali and uniform liquid-solid two-phase suspended liquid such as mud, pulp, pulp, etc.

In the metering industry, electromagnetic flowmeter is a basic metering tool, and its range of use is very wide. The emergence of electromagnetic flowmeters has made great contributions to many industries, and it occupies a very important position in these industries. Pay more attention when using the electromagnetic flowmeter, check it before use to see how accurate its measurement is. The calibration of electromagnetic flowmeter is mainly considered from the following aspects:

Fixed the electromagnetic flowmeter for periodic visual inspection, check the environment around the instrument, clean dirt, ensure that no water and other substances, check whether the wiring is good, check whether the electromagnetic flowmeter near the new installation of strong electromagnetic field equipment or a new wire across the instrument.

The use of electromagnetic flowmeters is very wide, and this measuring instrument is used in many industries. Electromagnetic flowmeter is different from the general flowmeter, it follows the principle of electromagnetic induction, can measure the flow of liquid in the pipeline and its velocity.

Electromagnetic flowmeter at work requires that the measured medium must be ground potential, generally through the pipeline or flange ground, if the process pipe connected to the sensor relative to the measured medium is insulated (plastic pipe or pipe with an insulating lining), you must choose a grounding ring or sensor with a grounding electrode, so that the measured medium in the ground potential, easy to be ignored in the actual design and installation.

With the speeding up of urbanization process in our country, environmental pollution is increasingly serious. Because in sewage treatment, it is necessary to analyze and control the discharged sewage, additives, sludge, etc., so the flow measurement is very important. Among the many flowmeter products used for sewage measurement, electromagnetic flowmeter measurement accuracy is higher.