Explosion-Proof Flow Meter DN80 Stainless Steel 316 Saturated Steam Vortex Flowmeter Sensor

Vortex flowmeter can be widely used in large, medium and small kinds of pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagents and compressed air, saturated and superheated steam, natural gas and various media flow measurement and can be used as a flow transmitter in automatic control system, long service life. Points of attention for vortex flowmeter installation:

As industries continue to seek efficient and reliable flow measurement solutions, vortex flow meters stand out for their accuracy, adaptability, and durability. Their ability to provide real-time data and facilitate process optimization makes them indispensable tools for ensuring the efficient operation of various industrial processes where precise flow measurements are essential.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Vortex flowmeter is a new type flowmeter for measuring fluid flow in closed pipeline according to Karman vortex principle. It is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions.

5 main points of vortex flow meter selection

Another notable application of vortex flow meters is in the field of HVAC (Heating, Ventilation, and Air Conditioning) systems. These meters accurately measure the flow of chilled water or air, providing essential data for optimizing system performance and energy efficiency. By monitoring flow rates in HVAC systems, vortex flow meters help maintain ideal conditions in buildings, ensuring proper temperature control and minimizing energy consumption. In summary, vortex flow meters find widespread application across diverse industries, offering a reliable and cost-effective solution for measuring fluid flow in a variety of challenging environments.

In HVAC (heating, ventilation, and air conditioning) systems, vortex flow meters are utilized to measure the flow rates of air and other gases. Their ability to provide accurate readings in a wide range of temperatures and pressures ensures efficient HVAC system operation. Vortex flow meters contribute to energy savings by enabling precise control of airflow and facilitating better management of heating and cooling processes.

Across various industries, including pharmaceuticals, food and beverage, and power generation, vortex flow meters continue to find applications in processes requiring precise fluid flow measurement. Their adaptability to different fluid types, low maintenance requirements, and reliable performance make them indispensable tools for optimizing industrial processes and ensuring the accurate allocation of resources.

The method and requirements of temperature compensation will vary according to the specific application. In general, temperature compensation can be used in the following ways:

The ethane Flow Meter Purchase Guide is designed to help you choose the best solution for your needs. In the purchase process, it is necessary to consider the nature, use, safety, measurement accuracy, stability, cost and other factors. Here is a detailed shopping guide:

Whether the temperature and pressure compensation is required for steam measurement by vortex flowmeter mainly depends on the properties of the steam being measured and the requirements of measurement accuracy.

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

Vortex flowmeter is a commonly used flow meter, the use of any instrument is inseparable from daily maintenance and maintenance, whether it is its own failure or interference by external factors, we calmly respond to the occurrence of failure.

Temperature and pressure compensation integrated vortex flowmeter performance advantages:

When the vortex flowmeter has no liquid flow in the pipeline, the receiver counts abnormally due to the noise generated by the pipeline vibration, and the sensitivity of the instrument should be adjusted.

Precautions for installation and use of vortex flow meter

Vortex steam flowmeter is one of the main flowmeter products, widely used in petroleum, chemical industry, metallurgy, heating and other departments. Test and measure the flow of liquid, gas and steam.

Vortex flowmeters are versatile instruments commonly used in various industries for fluid flow measurement. Here are some applications of vortex flowmeters in different industries:

Intelligent vortex flowmeters can measure air. Vortex flowmeter is a new flowmeter for flow measurement based on Karman vortex principle. It has good medium adaptability and can directly measure the volume flow of various media (including air). When measuring air, the vortex flowmeter generates regular vortices through the triangular column vortex generator set in the fluid, and the frequency of these vortices is proportional to the average velocity of the measured medium, so that the air flow can be calculated.

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

Reliability is a hallmark of vortex flow meters, as they exhibit robust performance in harsh operating conditions. Their simple yet sturdy design, often featuring no moving parts, results in minimal maintenance requirements and increased longevity. This reliability is particularly crucial in industries where consistent and accurate flow measurement is essential for process control and optimization.

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)

Vortex flowmeter is a kind of fluid oscillating flow detection instrument based on Karman vortex principle. It is characterized by small pressure loss, wide range and high measurement accuracy. It is almost unaffected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, there may be problems such as large measurement errors, so we need to eliminate problems from the following aspects:

Vortex flowmeter is mainly used to set up a vortex generating body (resistance fluid) in the fluid, from both sides of the vortex generating body alternately to produce regular vortices, to measure the flow of fluid, vortex flowmeter is mainly used for industrial pipeline fluid flow measurement, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, the output signal may be unstable, causing this phenomenon to be excluded from the following points:

Nominal diameter: DN25～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Material: 304, 316L various materials
Measuring media： Steam, compressed air, liquid (single phase media)
LUGB flange clamped vortex street steam flowmeter is a commonly used structure, its body itself does not have a connection flange, in connection with the pipe, the flowmeter clamped between two special flanges, and then bolted.

When selecting the right air flow meter product, a number of factors need to be considered to ensure that the selected product can meet the actual needs and has good performance. Here is a detailed buying guide to help you choose the best air flowmeter:

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems:

vortex flow meters offer a cost-effective solution for flow measurement. Their relatively simple design, coupled with low maintenance requirements, contributes to a lower total cost of ownership over the life of the instrument. This cost efficiency, combined with their accuracy and reliability, positions vortex flow meters as a favorable choice for industries seeking optimal performance without compromising on budget considerations.

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

The robust and durable construction of vortex flow meters contributes to their popularity in industrial settings. With no moving parts in direct contact with the fluid, these meters offer minimal maintenance requirements and extended operational life. Moreover, advancements in technology have allowed for the development of digital vortex flow meters that offer enhanced precision and communication capabilities, facilitating integration with modern process control systems.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Vortex flow meters are highly versatile instruments widely utilized in various industrial applications to measure the flow of liquids, gases, and steam. One prominent application of vortex flow meters is in the oil and gas industry, where they play a crucial role in measuring the flow rates of hydrocarbons through pipelines. These meters are particularly adept at handling the challenging conditions present in oil and gas operations, including high pressures and temperatures. By accurately measuring flow rates, vortex flow meters contribute to efficient process control and optimization, ensuring that production and transportation systems operate smoothly and cost-effectively.