Home » Flow Meter » Electromagnetic Flow Meter » Electromagnetic flow meter sewage measurement points

Electromagnetic flow meter sewage measurement points

Electromagnetic flowmeter is a kind of induction meter to measure the volume flow of conductive medium, which can be used to measure the volume flow of strong corrosive liquid such as strong acid and alkali and uniform liquid-solid two-phase suspended liquid such as mud, pulp, pulp, etc.

Rated 4.8/5 based on 549 customer reviews
Share:
Content

Electromagnetic flowmeter is a kind of induction meter to measure the volume flow of conductive medium, which can be used to measure the volume flow of strong corrosive liquid such as strong acid and alkali and uniform liquid-solid two-phase suspended liquid such as mud, pulp, pulp, etc. There are many types of intermediate substances in the measurement, the measurement of sewage generally does not require daily maintenance, but the measured medium is easy to be in the electrode and the inner wall of the measurement tube and the electrode. Be careful not to damage the flowmeter lining and electrodes.

In the time of fault self-inspection, we will carry out fault analysis according to specific phenomena, generally as follows:

1. Measure whether the medium in the tube is full, whether the meter’s lining and the meter’s electrode are scaled;

2. Whether all cable connections of the flow meter are reliable and safe;

3. Whether the grounding requirements of the flowmeter are met;

4. Whether the flowmeter excitation coil is short-circuited or disconnected, and whether it is insulated to the ground; .

5. Whether the medium in the pipe system of the flow meter installation is leaking, whether the upstream and downstream valves are affected, and whether the installation position of the flow meter is appropriate and reasonable;

6. Whether the surrounding environment interferes with the flow meter;

7. Whether the converter of electromagnetic flowmeter for sewage will fail.

Inquiry


    More Electromagnetic Flow Meter

    Electromagnetic flowmeter is a speed meter to measure the volume flow of conductive media. While carrying out on-site monitoring and display, it can output standard current signals for recording, adjustment and control, realizing automatic control of detection, and realizing long-distance transmission of signals. It can be widely used in water, chemical, coal, environmental protection, textile, metallurgy, paper and other industries in the flow measurement of conductive liquid. The structure of the instrument has one type and one type.

    Performance Technical parameter
    Size DN3-DN3000mm
    Nominal Pressure 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
    Accuracy +/-0.5%(Standard)     +/-0.3% or +/-0.2%(Optional)
    Liner PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
    Electrode SUS316L, Hastelloy B, Hastelloy C       Titanium, Tantalum, Platinium-iridium
    Structure Type Integral type, remote type, submersible type, ex-proof type
    Medium Temperature -20~+60 degC(Integral type)
    Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
    Remote type(PTFE/PFA/FEP) -10~+160degC
    Ambient Temperature -20~+60deg C
    Ambient Humidity 5-100%RH(relative humidity)
    Measuring Range Max 15m/s
    Conductivity >5us/cm
    Protection Class IP65(Standard); IP68(Optional for remote type)
    Process Connection Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
    Output Signal 4-20mA/Pulse
    Communication RS485(Standard), HART(Optional),GPRS/GSM (Optional)
    Power Supply AC220V (can be used for AC85-250V)
    DC24V (can be used for DC20-36V)
    DC12V (optional), Battery Powered 3.6V (optional)
    Power Consumption <20W Alarm Upper Limit Alarm / Lower Limit Alarm Self-diagnosis Empty Pipe Alarm, Exciting Alarm Explosion Proof ATEX