Blade Mechanical Liquid Turbine Gasoline Fuel Oil Pulse Prices Turbine Flow Meter

Nominal diameter: DN15-DN200mm
Accuracy level: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

The threaded liquid turbine flowmeter is a kind of precision flow measuring instrument, which can be used to measure the flow and total amount of liquid with the corresponding flow integrating instrument. Widely used in petroleum, chemical industry, metallurgy, scientific research and other fields of measurement, control system. Threaded liquid turbine flowmeter sensors with sanitary fittings can be used in the pharmaceutical industry.

the characteristics of liquid turbine flowmeters include high accuracy, wide rangeability, compact design, durability, and quick response times. These qualities collectively contribute to their effectiveness and reliability in measuring liquid flow rates across diverse industrial applications.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Liquid turbine flowmeter mainly uses advanced single-chip microcomputer technology, is a new type of flow meter and traditional turbine flow sensor and secondary meter measurement system, compared with its smaller volume, and intuitive reading display, turbine flowmeter in the measurement, will not be affected by external power supply, and has a good anti-lightning meter low cost advantage.

liquid turbine flowmeters are utilized in HVAC (heating, ventilation, and air conditioning) systems to measure the flow of liquids such as water or refrigerants. In this context, they contribute to the efficiency of temperature control systems by providing accurate flow data, enabling precise adjustments and optimal energy utilization in commercial and residential buildings.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Nominal diameter: DN4-DN200mm
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

In the chemical and petrochemical industries, liquid turbine flowmeters play a crucial role in measuring the flow of various liquids, including corrosive chemicals and petroleum products. Their ability to handle a wide range of liquids, coupled with high accuracy, makes them essential for monitoring and controlling processes in chemical manufacturing, ensuring precision and safety in handling potentially hazardous substances.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Size: DN4,6,10,15,20,32,40,50,65,80
Accuracy: ±0.5% (±0.2% Optional)
Sensor Material: SS304 (SS316L Optional)
Signal Output: Pulse, 4-20mA
Digital Communication: MODBUS RS485, HART

Liquid turbine flowmeter is a kind of precision flow measuring instrument, which can be used to measure the flow and total amount of liquid with the corresponding flow integrating instrument. Liquid turbine flowmeters are widely used in measurement and control systems in petroleum, chemical industry, metallurgy, scientific research and other fields. Liquid turbine flowmeters with sanitary fittings can be used in the pharmaceutical industry.

Nominal diameter: DN15-DN200mm
Accuracy level: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

A liquid turbine flow meter is a type of flow meter designed to measure the flow rate of liquid substances, such as water, chemicals, or petroleum-based fluids. It operates on the principle of a turbine inserted into the flow stream. As the liquid flows through the meter, it causes the turbine to rotate. The rotational speed of the turbine is directly proportional to the velocity of the liquid, allowing for accurate measurement of the flow rate.

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Accuracy: ±0.5%, ±0.2% Optional
Sensor Material: SS304, SS316L Optional
Signal Output: Pulse, 4-20mA, Alarm(optional)
Digital Communication: MODBUS RS485; HART
Power Supply: 24V DC/3.6V Lithium Battery

Liquid turbine flow meters are devices used to measure the flow of liquids through a pipeline. They operate on the principle of a turbine rotor turning in response to fluid flow. Here are some advantages of liquid turbine flow meters:

Liquid turbine flowmeters also find application in the pharmaceutical industry, where precise measurements of liquid flow rates are vital for the production of pharmaceutical products. From monitoring the flow of ingredients during manufacturing to ensuring accurate dosing in pharmaceutical research and development, these flowmeters contribute to the quality and consistency of pharmaceutical processes.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Liquid turbine flowmeters find widespread applications across various industries due to their versatility, accuracy, and reliability in measuring liquid flow rates. One prominent application is in the field of water management, where these flowmeters are utilized to measure the flow of water in distribution systems, wastewater treatment plants, and irrigation networks. The accurate and real-time data provided by liquid turbine flowmeters contribute to efficient water resource management and conservation efforts.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Liquid turbine flow meters are devices used to measure the flow of liquids through a pipeline. They operate on the principle of a turbine rotor turning in response to fluid flow. Here are some advantages of liquid turbine flow meters:

Nominal diameter: DN15-DN200mm
Accuracy level: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Size: DN4,6,10,15,20,32,40,50,65,80
Accuracy: ±0.5% (±0.2% Optional)
Sensor Material: SS304 (SS316L Optional)
Signal Output: Pulse, 4-20mA
Digital Communication: MODBUS RS485, HART

Liquid turbine flowmeters offer several advantages that make them a popular choice for measuring the flow of liquids in various industrial applications. One significant advantage is their high accuracy in providing precise measurements of liquid flow rates. These flowmeters are capable of delivering reliable data, making them essential for industries where accurate monitoring and control of fluid processes are critical for operational success.

Connection mode: Thread, clamp, flange, clamp type
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material: 304, 316 stainless steel, etc
Use conditions: Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function: Pulse signal, 4-20mA signal
Communication output function: RS485 communication, HART protocol, etc

Turbine flow sensor structure: When the measured flow body flows through the sensor, under the action of fluid, the impeller is forced to rotate, and its speed is proportional to the average flow velocity of the pipeline. The rotation of the impeller periodically changes the magnetic resistance value of the magnetoelectric converter, and the magnetic flux in the detection coil changes periodically, generating the induced potential with the same rotation frequency, namely, the electrical pulse signal, after amplification by the amplifier. Send DAO display instrument display.

Turbine flowmeter is a kind of speed instrument, which has the advantages of high precision, good repeatability, simple structure, high pressure resistance, wide measuring range, small size, light weight, small pressure loss, long life, simple operation, easy maintenance, etc., used to measure the volume flow and accumulation of low viscosity, no strong corrosion and clean liquid in closed pipelines. It can be widely used in petroleum, chemical industry, metallurgy, organic liquid, inorganic liquid, liquefied gas, urban gas pipe network, pharmaceutical, food, paper and other industries.

Liquid turbine flowmeters also find application in the pharmaceutical industry, where precise measurements of liquid flow rates are vital for the production of pharmaceutical products. From monitoring the flow of ingredients during manufacturing to ensuring accurate dosing in pharmaceutical research and development, these flowmeters contribute to the quality and consistency of pharmaceutical processes.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

The ATWY threaded liquid turbine flowmeter structure is explosion-proof and can display the total flow rate, instantaneous flow rate and flow full percentage. The battery uses a long-acting lithium battery, the service life of the single-function accumulator battery can reach more than 5 years, and the service life of the multi-function display battery can also reach more than 12 months.

Nominal diameter: DN4-DN200mm
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Intelligent turbine flowmeter is a very popular flow meter, the reason why it is popular, in addition to its convenient use and high precision, there is also a very important point, that is, when it is used, it has a long service life, which is also very important, because all the units or individuals who use this thing also want to long-term use.

the versatile applications of liquid turbine flowmeters span industries such as water management, chemical manufacturing, pharmaceuticals, oil and gas, and HVAC systems. Their ability to deliver accurate and real-time liquid flow measurements makes them indispensable for enhancing efficiency, safety, and precision in a wide range of industrial processes.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Liquid turbine flowmeters exhibit several key characteristics that make them well-suited for a variety of industrial applications. One significant characteristic is their high accuracy in measuring liquid flow rates. The turbine mechanism within the flowmeter, combined with precise calibration, allows for reliable and precise measurements, making them essential in industries where accuracy is paramount for process control and optimization.

Connection mode：Thread, clamp, flange, clamp type
Accuracy：±1%R、±0.5%R、±0.2%R (to be customized)
Sensor material：304, 316 stainless steel, etc
Use conditions： Medium temperature：-20℃～+120℃  Ambient temperature：-20℃～+60℃
Relative humidity：5%-90%         Atmospheric pressure：86Kpa～106Kpa
Signal output function：Pulse signal, 4-20mA signal
Communication output function：RS485 communication, HART protocol, etc
Working power supply：External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface：Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class：Exia II CT or Exd II BT6
Protection class：IP65 or higher customizable

Nominal diameter: DN4-DN200mm
Accuracy: ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid