Advantages and disadvantages of thermal gas mass flow meter

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow. The thermal gas mass flowmeter has the advantages of small size, high digitization, easy installation and accurate measurement.

In-line thermal mass flowmeter is equipped with the same process pipe with the same inner diameter as the field pipe. The connection with the field pipe is flange connection or thread connection. Pipe segment sensor applicable pipe diameter: DN15 ~ 2000mm.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

The origin of the thermal gas mass flowmeter is from the hot wire anemometer. The temperature of the platinum heating wire has a proportional relationship with the change in the flow rate of the fluid: the faster the flow rate, the more heat is taken away.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

Direct measurement of gas mass, without temperature, pressure compensation of gas flow measurement instrument, it represents the development trend of gas flow measurement. The thermal mass flowmeter sensor part is composed of two reference platinum resistance temperature sensors, using a bridge loop, one sensor measures the fluid temperature, and the other sensor is a heating element, maintaining a constant temperature difference higher than the fluid temperature, that is, when the gas flows through the heating element, the heat is taken away, and the heat is proportional to the flow rate of the gas and the density of the gas. To maintain a fixed temperature difference between the two temperature sensors requires the circuit to provide more power to the heating element, and the amount of output power in the circuit is related to the mass of the fluid, thus measuring the flow rate.

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc

Thermal gas mass flow meter is used to measure and control the gas mass flow meter, different from other gas flow meters, do not need to carry out pressure and temperature correction, directly measure the gas mass flow.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow. The most important thing is that the range ratio of this flowmeter is very wide, which greatly meets the measurement needs of the owner.

Thermal gas mass flowmeter adopts the principle of thermal diffusion, and thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions.

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure fluid flow. The instrument uses the constant temperature difference method to measure the gas flow accurately. It has the advantages of small size, high digitization, easy installation and accurate measurement. Today we are mainly to talk about the thermal gas mass flowmeter in the installation process need to pay attention to what are?

When selecting a thermal mass flowmeter, several important factors should be taken into consideration to ensure it meets the requirements of the application and provides accurate and reliable measurements. Here are key points to pay attention to:

Thermal gas mass flowmeter can be used to measure any gas that does not contain condensed liquid in various shapes and materials (such as round pipe, square pipe, rectangular pipe, etc., diameter from 8mm-10000mm or larger, all kinds of metal, plastic, cement material), it does not need temperature and pressure compensation, directly measure the mass flow of fluid.

Due to the continuous development of thermal gas mass flow meter is based on the principle of thermal diffusion, that is, the use of fluid flow through the heated object, the heated object of the heat dissipation of how much with the fluid flow rate into a certain proportional relationship. Specifically, the flow meter’s sensor has two standard and the RTD, has been used as a heat source, has been used to measure the fluid temperature, the fluid flows through, the heat loss of the heat source and the size of the flow into a non-linear relationship, the thermal gas mass flowmeter can be converted into a measurement of this relationship to measure the flow rate of the signal of the linear output.

Thermal gas mass flowmeter has certain operating procedures and precautions in use, and must pay attention to these points when in use:

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The thermal gas mass flowmeter uses the constant temperature difference method to accurately measure the gas mass flow. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Thermal gas mass flowmeter is based on the principle of thermal diffusion design and production of the product is widely used in steel plants, coking plants, petroleum, chemical, thermal, medical, thermal power plants, environmental protection and other industries.

What are the advantages and precautions of the thermal gas mass flow meter?

The thermal gas mass flowmeter is used for the measurement of a single component of gas or a fixed proportion of mixed gas, and has been widely used in petroleum, chemical, semiconductor, medical instruments, biological engineering, combustion control, gas distribution, environmental monitoring, precision instruments, scientific research, metrology, food, metallurgy, aerospace and other fields.

How to improve the accuracy of thermal gas mass flow meter?

The unique temperature difference measurement method of the hot gas mass flowmeter overcomes the great zero drift caused by water, oil and impurities in the gas when measuring the gas flow by the hot gas mass flowmeter based on the principle of constant temperature difference.

Thermal mass flowmeters offer several advantages and disadvantages, which are important to consider when selecting a flow measurement solution. Here are some of the key advantages and disadvantages:

The thermal gas mass flowmeter is an instrument that uses the principle of heat conduction to measure flow. The instrument uses the constant temperature difference method to accurately measure the gas mass flow rate. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

The thermal gas mass flowmeter is an instrument for measuring fluid flow by using the principle of heat conduction. The instrument uses constant temperature difference method to accurately measure the gas mass flow.

The thermal gas mass flowmeter is used for the measurement of a single component of gas or a fixed proportion of mixed gas, and has been widely used in petroleum, chemical, semiconductor, medical instruments, biological engineering, combustion control, gas distribution, environmental monitoring, precision instruments, scientific research, metrology, food, metallurgy, aerospace and other fields.

The thermal gas mass flowmeter uses the principle of thermal diffusion, and its working principle determines the change of the measured medium gas with the temperature and pressure, which affects the data change of the measured results.

The thermal gas flowmeter adopts the principle of thermal diffusion, and the thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions. Typical sensing elements of thermal gas mass flowmeters include two thermal resistors (PT100), one is a speed sensor and one is a temperature sensor that automatically compensates for changes in gas temperature.

Thermal Gas Mass Flow Meter is also divided into flange link Thermal Gas Mass Flow Meter and plug-in link Thermal Gas Mass Flow Meter, The following describes the application scope of the Thermal Gas Mass Flow Meter.

Thermal gas mass flowmeter based on the principle of thermal diffusion, using constant temperature difference method designed, is a gas measurement instrument.

Thermal gas mass flowmeter is the use of fluid flowing through the pipe heated by an external heat source when the temperature field changes, is a high-sensitivity, high-precision gas measurement instrument, in the gas flow measurement conditions, good stability, used for gas process control and gas flow measurement one of the most used instruments.

Thermal mass flowmeters are widely used in various industries due to their ability to measure the flow rate of gases accurately. Here are some applications of thermal mass flowmeters across different industries:

At present, oxygen generator in the production process will be affected by external influences, more and more enterprises for fine management, energy consumption, cost accounting and other requirements for the loss of this part of the oxygen measurement.