4-20mA Industrial Chemical Wastewater Magnetic Sewage Flow Meter Liquid Control Digital Water

Usually there is more or less a mixture in the fluid in the measurement of some occasions. In general, in the presence of a small bubbling flow of oil and gas bubbles, it is still able to work normally, but the measurement is a fusion of the volume of oil bubbles, if the proportion of oil and gas rises to have caused a projectile flow, then the electrode may be covered by gas, resulting in the circuit is disconnected, the output shake is more likely to be directly damaged.

The performance excellence of electromagnetic flowmeters is further underscored by their low maintenance requirements. The absence of mechanical components in direct contact with the fluid minimizes wear and tear, reducing the need for frequent maintenance interventions. This not only enhances the longevity of the flowmeter but also translates into cost savings for industries where operational efficiency is paramount.

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa… Max 42Mpa)
Accuracy: +/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode: SUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium
Structure Type: Integral type, remote type, submersible type, ex-proof type

electromagnetic flowmeters have emerged as indispensable tools for industries that demand accurate and reliable flow measurements. Their advanced technology, coupled with the ability to operate in diverse environments and handle various conductive liquids, positions them as a preferred choice in applications ranging from water management to chemical processing. As technology continues to evolve, electromagnetic flowmeters are likely to witness further advancements, contributing to increased efficiency and precision in liquid flow measurement across different sectors.

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa… Max 42Mpa)
Accuracy: +/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode: SUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium
Structure Type: Integral type, remote type, submersible type, ex-proof type
Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range: Max 15m/s
Conductivity: >5us/cm
Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse
Communication: RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply: AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption: <20W Alarm: Upper Limit Alarm / Lower Limit Alarm Self-diagnosis: Empty Pipe Alarm, Exciting Alarm Explosion Proof: ATEX

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

According to the principle formula of the electromagnetic flowmeter, the induced signal potential is not affected by the change of conductivity and temperature, pressure, density and viscosity when the liquid conductivity is uniform. However, in the actual measurement, due to the following reasons, the electrical conductivity will also have some impact on the measurement.

Once the installation location is determined, the next step is preparing the piping system. Ensure that the pipeline is clean and free from debris that could interfere with the operation of the flowmeter. In some cases, straight pipe runs are recommended both upstream and downstream of the flowmeter to allow for proper fluid flow development and stabilization. This helps in achieving optimal measurement accuracy.

The electromagnetic flowmeter should be installed with the flow direction aligned with the arrow on the flowmeter body. Proper orientation ensures that the magnetic field generated by the flowmeter’s coils is perpendicular to the fluid flow, allowing for accurate measurements. Additionally, it is essential to properly ground the flowmeter to minimize electrical noise and interference, ensuring the stability of the measurement signals.

The installation process involves securely mounting the flowmeter on the piping system using appropriate brackets or supports. Care should be taken to align the flowmeter properly and tighten all connections to prevent leaks. Adequate sealing measures must be implemented to prevent ingress of moisture or contaminants into the flowmeter, which could adversely affect its performance.

One of the significant advantages of electromagnetic flowmeters is their high level of accuracy and reliability. With no moving parts in direct contact with the fluid, these devices experience minimal wear and tear, resulting in low maintenance requirements and increased longevity. Their versatility allows them to handle a broad spectrum of conductive liquids, from water and chemicals to slurries, making them suitable for a wide range of applications. Moreover, electromagnetic flowmeters are insensitive to changes in fluid properties, such as density, viscosity, and temperature, ensuring consistent and precise measurements across varying operating conditions.

Power Supply: AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption: <20W Alarm: Upper Limit Alarm / Lower Limit Alarm Self-diagnosis: Empty Pipe Alarm, Exciting Alarm Explosion Proof: ATEX

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

Electromagnetic flowmeters, also known as magmeters or magnetic flowmeters, are widely used for measuring the flow rate of conductive liquids in various industries. Several factors can influence the accuracy of electromagnetic flowmeters. Understanding and addressing these factors are essential to ensure precise and reliable flow measurements. Here are some key factors that can affect the accuracy of electromagnetic flowmeters:

What are the external interference problems of the electromagnetic flowmeter for domestic wastewater

Electromagnetic flow meters offer several advantages, making them a popular choice in various industrial applications. Here are some of the key advantages of electromagnetic flow meters:

The versatility of electromagnetic flowmeters is a testament to their robust performance across a wide range of conductive liquids. Whether dealing with water, acids, bases, or slurries, these flowmeters maintain their accuracy and reliability. This adaptability is particularly valuable in industries with varying fluid compositions, allowing for a single flowmeter type to be employed in diverse applications without sacrificing performance.

Protection Class: IP65(Standard); IP68(Optional for remote type)
Process Connection: Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal: 4-20mA/Pulse
Communication: RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply: AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption: <20W Alarm: Upper Limit Alarm / Lower Limit Alarm Self-diagnosis: Empty Pipe Alarm, Exciting Alarm Explosion Proof: ATEX

The application of flowmeter in food processing is very extensive, mainly reflected in the following aspects:

Environmental monitoring is another domain where electromagnetic flowmeters prove valuable. In applications related to ecological studies and environmental research, these flowmeters aid in measuring water flow in rivers, streams, and other natural water bodies. The data obtained contributes to a better understanding of ecosystems, water resource management, and environmental conservation efforts.

Measuring Range： Max 15m/s
Conductivity： >5us/cm
Protection Class： IP65(Standard); IP68(Optional for remote type)
Process Connection： Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal： 4-20mA/Pulse
Communication： RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply： AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption： <20W Alarm： Upper Limit Alarm / Lower Limit Alarm Self-diagnosis： Empty Pipe Alarm, Exciting Alarm Explosion Proof： ATEX

Selecting the right electromagnetic flowmeter involves considering various factors to ensure it meets the specific requirements of your application. Here’s a step-by-step guide to help you choose an electromagnetic flowmeter:

Electromagnetic flowmeter in the use process will produce some faults affect the normal work of the instrument, how to find the cause behind the fault is a very important work, we need to identify through a variety of different types of detection methods, in general, we for electromagnetic flowmeter routine testing, usually including electrode contact resistance, electrode polarization voltage, Signal cable interference, the determination of whether there is a grounding potential and the flow of stray current in the pipeline five aspects, these five aspects can be carried out separately, in fact, but also interrelated, any change in the factor may cause other changes, this reminds everyone in the detection of special attention:

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s
Electromagnetic flow meter is one of the most popular flow meters. Flange type electromagnetic flow meter has been used for more than 50 years worldwide. It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc.

Electromagnetic flowmeter installation instructions, how to install electromagnetic flow meter?

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

The measuring channel of the electromagnetic flowmeter is a smooth straight pipe of an unimpeded flow detector, which is not easy to block and is suitable for measuring liquid-solid two-phase fluids containing solid particles or fibers, such as paper pulp, coal water pulp, mineral pulp, mud and sewage.

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

A type electromagnetic flowmeter does not require a separate converter; The separation electromagnetic flowmeter type converter is installed near the sensor or the instrument room, the place to choose is larger, the environmental conditions are better than the sensor, and the protection level is IP65 or IP64 (dust and splash level).

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s
Electromagnetic flow meter is one of the most popular flow meters. Flange type electromagnetic flow meter has been used for more than 50 years worldwide. It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc.

Selection of lining materials for electromagnetic flowmeter

Size: DN15mm-DN200mm
Nominal Pressure: 1.6Mpa
Accuracy: ±0.5%(Standard)
Liner: FEP, PFA
Output Signal: 4-20mA pulse frequency relay

Electromagnetic flow meter is one of the most popular flow meters. Flange type electromagnetic flow meter has been used for more than 50 years worldwide. It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc.

Notes for electromagnetic flowmeter selection:

Electromagnetic flowmeters are classified according to the assembly method of converters and sensors, with split type and one type. Split type electromagnetic flowmeter is relative to the integrated, its components are: measuring tube, electrode, excitation coil, iron core and yoke housing. Used to measure the volume flow of conductive liquid and slurry in closed pipes.